484650

Truma Mover Mover H SE R Manual

19
Zoom out
Zoom in
Previous page
1/76
Next page
19
Assembly of the drive units
1. Loosely screw the angle bracket to the vehicle frame so that
it can still be moved.
2. Place the drive unit onto the vehicle frame so that the bolts
of the flange plate point inside through the provided bore-
holes of the vehicle frame.
3. Push the angle bracket over the bolts and secure the drive
unit with the enclosed 4 nuts.
4. Tighten the 4 nuts of the drive unit with a torque of 70 Nm
and the 4 nuts of the angle bracket with a torque of 40 Nm!
40 Nm40 Nm
70 Nm
Assembly of the drive units for model
Mover® H TE R
on vehicle frames 610 – 650
2 extra screws and nuts (also included in the delivery) are
required for each drive unit to mount the Mover® H TE R
to the vehicle frames 610 – 650.
Depending on the vehicle frame (reduced/increased GVW),
the drive units of the Mover® H TE R must be mounted to
different positions of the vehicle frame. This ensures that the
functional dimension lies in the allowed range (see “Func-
tional dimension”).
Variant 610 – 650
Position boreholes
without increased GVW
Variant 610 – 650
Position boreholes
with increased GVW
1. Loosely screw the angle bracket to the vehicle frame so that
it can still be moved.
2. Place the drive unit onto the vehicle frame so that the bolts
of the flange plate point inside through the provided bore-
holes of the vehicle frame.
3. Push the drive unit until the position boreholes of the drive
unit and the vehicle frame overlap – insert the screws (4 )
into the position boreholes – with the thread toward the
vehicle frame.
4. Push the angle bracket over the bolts and the screws.
5. Secure the drive unit with the enclosed 6 nuts.
6. Tighten the 6 nuts of the drive unit with a torque of 70 Nm
and the 4 nuts of the angle bracket with a torque of 40 Nm!
40 Nm40 Nm
70 Nm
4
Functional dimension
To ensure that the Mover® functions correctly, the clear-
ance between the tyres and the swivelled driving rollers is
10 – 26 mm (for loaded vehicles and loaded wheels). If the
clearance is not within this range, steps must be taken to
check whether or not the correct tyre type is used (see “Iden-
tifying the angle bracket”) or if the tyres are heavily worn. All
tyres must have the same inflation pressure as per the manu-
facturer’s instructions (check at regular intervals!).
10 – 26 mm
min. 110 mm
Driving direction
Fit covering plates
Place covering plate onto housing and fix in position with
3 guide pins in each case (knock in with a hammer or screw-
driver handle).
Installing the position indicator
Push the position indicator into the two holes in the gearbox.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Truma Mover Mover H SE R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Truma Mover Mover H SE R in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 9,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info