Manual Truma Mover H TE (page 18 of 76) (English, German, Dutch, Danish, French, Italian, Spanish)

484674

Zoom out

Zoom in

1/76

Assembly of the Mover

The frame of the vehicle must be kept free of rust and heavy

soiling and without any damages to the suspension

components.

The wheels and tyres that are fitted to the caravan must be of

the same size and model and inflated as per the manufacturer’s

instructions.

Remove all components from packing and place on the floor.

In order to maintain the validity of the General Operat-

ing Permit (ABE), the provided factory plates (f) must be

attached on the left and right sides of the cross strut between

the drive unit retaining plates.

Assembly of the drive units

1. Loosely screw the angle bracket to the vehicle frame so that

it can still be moved.

2. Place the drive unit onto the vehicle frame so that the bolts

of the flange plate point inside through the provided bore-

holes of the vehicle frame.

3. Push the angle bracket over the bolts and secure the drive

unit with the enclosed 4 nuts.

4. Tighten the 4 nuts of the drive unit with a torque of 70 Nm

and the 4 nuts of the angle bracket with a torque of 40 Nm!

40 Nm40 Nm

70 Nm

Assembly of the drive units for model Mover H TE

on vehicle frames 610 – 650

2 extra screws and nuts (also included in the delivery) are

required for each drive unit to mount the Movers H TE to

the vehicle frames 610 – 650.

Depending on the vehicle frame (reduced/increased GVW),

the drive units of the Mover H TE must be mounted to differ-

ent positions of the vehicle frame. This ensures that the func-

tional dimension lies in the allowed range (see “Functional

dimension”).

Variant 610 – 650

Position boreholes

without increased GVW

Variant 610 – 650

Position boreholes

with increased GVW

1. Loosely screw the angle bracket to the vehicle frame so that

it can still be moved.

2. Place the drive unit onto the vehicle frame so that the bolts

of the flange plate point inside through the provided bore-

holes of the vehicle frame.

3. Push the drive unit until the position boreholes of the drive

unit and the vehicle frame overlap – insert the screws (4 )

into the position boreholes – with the thread toward the

vehicle frame.

4. Push the angle bracket over the bolts and the screws.

5. Secure the drive unit with the enclosed 6 nuts.

6. Tighten the 6 nuts of the drive unit with a torque of 70 Nm

and the 4 nuts of the angle bracket with a torque of 40 Nm!

40 Nm40 Nm

70 Nm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Truma Mover H TE in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 7,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Truma Mover H TE Manual

Product: