629585
13
Zoom out
Zoom in
Previous page
1/68
Next page
13
Start-up
Open the gas remote switch if present.
3.
1.
2.
Figure 1
1. Open the cylinder valve.
2. Firmly press the hose rupture protection (green button) on
the high‑pressure hose for about 5 seconds.
3. If necessary (e.g. after a new installation or inadvertently
striking the gas cylinder against the gas pressure regul‑
ation system), press the green reset button (crash sensor
triggering element reset) on the MonoControl CS for about
5seconds.
Changing the LPG cylinder
Use the included screw aid to attach and remove the
high‑pressure hoses. It will help you generate the necessary
tightening torque and will prevent damage to the screw fit‑
tings, which may otherwise result from using an improper tool.
Residual gas: No smoking, no naked flames!
Close the valve of the empty gas cylinder.
Remove the high pressure hose from the gas cylinder and
remove the slip‑on adapter, if present.
Attach the high pressure hose to the full gas cylinder and fit
the slip‑on adapter, if present.
Open the full gas cylinder’s valve.
Firmly press the hose rupture protection (green button) and,
if necessary, the green reset button for about 5 seconds in
each case.
Any time after making changes, check the hose con‑
nection to the cylinder valve for leaks (see “Checking for
leaks in the high‑pressure section”).
Hose change
Please use the included screw aid to attach and remove the
high pressure hoses. It will help you generate the necessary
tightening torque and will prevent damage to the screw fit‑
tings, which may otherwise result from using an improper tool.
Residual gas: No smoking, no naked flames!
Operating instructions
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Truma MonoControl CS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Truma MonoControl CS in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info