728104
10
Zoom out
Zoom in
Previous page
1/13
Next page
10 EN
hand-held vacuum cleaner VC 10 E
The device does not start:
The battery power might be too low. Recharge the battery.
Check the charger and charging socket for dirt. Remove
any dirt.
Check whether the charger is connected. If the charger is
connected, the device will not start.
Info
Wait for at least 10 minutes before switching the
device back on.
Note
Wait for at least 3 minutes after maintenance and
repair work. Only then switch the device back on.
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to an authorized specialist electrical company or to
Trotec for repair.
Maintenance
Activities required before starting maintenance
Warning of electrical voltage
Do not touch the mains plug of the charger with wet or
damp hands.
Switch the device off.
Hold onto the mains plug while pulling the power cable of
the charger out of the mains socket.
Allow the device to cool down completely.
Warning of electrical voltage
Maintenance tasks which require the housing to be
opened must only be carried out by authorised
specialist companies or by Trotec.
Notes on maintenance
Inside the device, there are no parts that need to be maintained
or lubricated by the user.
Cleaning
The device should be cleaned before and after each use.
Note
The device does not have to be lubricated after
cleaning.
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Clean the device with a soft, damp and lint-free cloth.
Make sure that no moisture enters the housing. Protect
electrical components from moisture. Do not use any
aggressive cleaning agents such as cleaning sprays,
solvents, alcohol-based or abrasive cleaners to dampen
the cloth.
Dry the device with a soft, lint-free cloth.
Keep the connecting terminals on the device and charger
clean.
Keep the ventilation openings free from dust deposits to
prevent overheating of the motor.
Info
Empty the collection container(5) and clean the dust
filter(7) after each application to prevent a motor
overload and so as not to reduce the device efficiency.
Emptying the collection container
Please proceed as follows to empty the collection container:
ü The device is switched off.
1. Hold the device so that the collection container(5) points
downwards.
2. To open the collection container, press the release
button(8) and remove the collection container(5).
3. Remove the dust filter(7) from the collection container(5).
4. Empty the collection container(5) and rinse it with water,
if necessary.
5. Reattach the collection container(5) to the motor
housing(3) as described in Connecting motor housing and
collection container.
Cleaning the dust filter
Please proceed as follows to clean the dust filter:
1. Remove the dust filter(7) from the collection container(5).
2. Pull the filter bag with the holding fixture(18) out of the
dust filter housing(19).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec VC10E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec VC10E in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec VC10E

Trotec VC10E User Manual - German - 13 pages

Trotec VC10E User Manual - Dutch - 13 pages

Trotec VC10E User Manual - French - 13 pages

Trotec VC10E User Manual - Italian - 13 pages

Trotec VC10E User Manual - Polish - 13 pages

Trotec VC10E User Manual - Turkish - 13 pages

Trotec VC10E User Manual - Spanish - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info