728104
11
Zoom out
Zoom in
Previous page
1/13
Next page
EN 11
hand-held vacuum cleaner VC 10 E
3. Remove coarse dirt and rinse the filter bag(18) with cold
water. Allow the dust filter to air-dry. Wait until the filter
bag(18) has dried completely before reinserting it in the
dust filter housing(19).
4. Insert the filter bag with the holding fixture(18) into the
dust filter housing(19) as described in the Start-up
chapter.
5. Reinsert the dust filter(7) into the device as described in
the Start-up chapter.
Connecting dust filter and collection container
Before start-up, the dust filter needs to be reassembled and
inserted in the collection container(5). To do so, please proceed
as follows:
1. Connected the filter bag with the holding fixture(18) to the
dust filter housing(19).
18
19
ð The dust filter(7) is now assembled and can be inserted
in the collection container(5).
2. Slide the dust filter(7) into the collection container(5) until
it is held securely by the integrated guides inside the
collection container(5).
ð The collection container(5) may now be connected to
the motor housing(3).
Connecting motor housing and collection container
Before start-up, the motor housing(3) needs to be connected to
the collection container(5). To do so, please proceed as follows:
1. Fit the collection container(5) onto the motor housing(3) in
a way that the recess(10) at the bottom of the collection
container is seated on the tongue beneath the motor
housing.
2. Slide the collection container(5) onto the motor housing
until the release button(8) snaps into place.
3. Check whether the collection container(5) is firmly seated
on the motor housing(3).
ð Collection container(5) and motor housing(3) are
connected.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec VC10E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec VC10E in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec VC10E

Trotec VC10E User Manual - German - 13 pages

Trotec VC10E User Manual - Dutch - 13 pages

Trotec VC10E User Manual - French - 13 pages

Trotec VC10E User Manual - Italian - 13 pages

Trotec VC10E User Manual - Polish - 13 pages

Trotec VC10E User Manual - Turkish - 13 pages

Trotec VC10E User Manual - Spanish - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info