727798
8
Zoom out
Zoom in
Previous page
1/13
Next page
8 EN
convector TCH 1500 E
Setting the heating level
The device is provided with 10heating levels which you can
select using the remote control or the control panel.
ü The device is switched on.
1. Press the Heating levelbutton(14) to increase the heating
level.
ð The Heating levelindication(22) on the display is
adapted accordingly.
2. Press the Heating levelbutton(14) again to increase the
heating level further. When the highest heating level has
been reached, the device automatically skips back to the
lowest heating level when the "Heating level" button is
pressed again.
Eco mode
The device is provided with an Eco mode in which the room
temperature is slowly increased to 26°C (e.g. in offices). In the
Eco mode, the temperature and the heating level cannot be
adapted. Proceed as follows to switch on the Eco mode:
1. Press the Ecobutton(12).
ð The Eco mode is activated.
ð The Eco mode activeindication(23) lights up on the
display.
2. Press the Ecobutton(12) again or press the heating
levelbutton(14) to exit the Eco mode.
Setting the timer
The timer has the following modes of operation:
automatic switch-on upon expiry of a preset number of
hours
automatic switch-off upon expiry of a preset number of
hours
The number of hours to be set can be between1 and24 and is
adjustable in increments of 1hour.
Note
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
Automatic switch-on
ü The device is in standby mode.
1. Press the timer button(11).
ð The timer mode activeindication(24) lights up on the
display.
ð The display indicates a switch-on time of 0hours.
2. Select the desired number of hours by use of the increase
value(10) or decrease value(15) button.
ð The number of hours flashes on the segment
display(17).
ð The time until automatic switch-on is saved.
ð After approx. 1minute the segment display goes off.
The timer activeindication(24) is illuminated until the
device switches on automatically.
Automatic switch-off
ü The device is switched on.
ü The device runs at the set heating level.
1. Press the timer button(11).
2. Select the desired number of hours by use of the increase
value(10) or decrease value(15) button. If you select
0hours, the timer will be off.
ð The number of hours flashes on the segment
display(17).
ð The time until automatic switch-off is saved.
ð For approx. 1minute, the segment display changes
between the display of the switch-off time and that of
the temperature selected.
ð After approx. 1minute the segment display goes off.
The timer active(24) and heating function active(25)
indications are lit until the device switches off
automatically.
Notes regarding automatic switch-off:
Manually switching the device off disables the automatic
switch-off function.
If you select 0hours, the timer will be off.
Activating/deactivating the automatic display switch-off
function
The device is provided with an automatic display switch-off
function which switches off the display after approx.
60seconds. The following indications are not deactivated:
Child lock activeindication(20)
Standbyindication(21)
Timer activeindication(24)
Heating function activeindication(25)
In the factory default, the automatic display switch-off function
is activated. Please proceed as follows to deactivate the
automatic display switch-off function:
1. Simultaneously press and hold the timer(11) and heating
level(14) buttons for approx. 3seconds.
ð The display switch-off function is deactivated. All
indications in the display remain stored (if they are
active).
2. Simultaneously press and hold the timer(11) and heating
level(14) buttons for approx. 3seconds if you wish to
activate the display switch-off function again.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TCH1500E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TCH1500E in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TCH1500E

Trotec TCH1500E User Manual - German - 14 pages

Trotec TCH1500E User Manual - Dutch - 14 pages

Trotec TCH1500E User Manual - French - 15 pages

Trotec TCH1500E User Manual - Italian - 14 pages

Trotec TCH1500E User Manual - Polish - 14 pages

Trotec TCH1500E User Manual - Turkish - 14 pages

Trotec TCH1500E User Manual - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info