753272
8
Zoom out
Zoom in
Previous page
1/18
Next page
8 EN
cordless drill driver PSCS 11-20V
Technical data
Parameter Value
Model PSCS11-20V
Nominal voltage 20V
Idle speed
1. speed level
2. speed level
0–400rpm
0–1550rpm
Torque settings 25 +1
Chucking range max. 13mm
Max. drilling diameter
Wood
Metal
30 mm
13 mm
Max. torque 35 Nm
Weight 1.7 kg
Battery Multiflex 20-2.0 DC
Type Li-ion
Nominal voltage 20V
Capacity 2Ah
Quick charger Multiflex 20-2.0 AC
Input
Nominal voltage 230 – 240 V/ 50 Hz
Power input 65 W
Output
Nominal voltage 21.5 V
Charging current 2.4 A
Fusing 3.15A (slow-blowing)
Charging time 1 h
Protection class II /
Sound values according to EN62841
Sound pressure level 72.20 dB(A)
Sound power level 83.20 dB(A)
Uncertainty K 3 dB(A)
Vibration information according to EN62841
Vibration emission value for
drilling in metal ah1.643 m/s2
Uncertainty K 1.5 m/s2
Information on noise and vibration:
The specified total vibration and noise emission values
were measured by means of a test procedure standardized
in EN62841 and can be consulted for the comparison of
one power tool with another.
The specified total vibration and noise emission values
can also be used for preliminary load assessment.
Caution
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
The actual vibration and noise emission may differ from
the stated values during operation of the power tool. This
depends on how the power tool is used and especially on
the type of workpiece being processed. Try to keep the
vibration load to a minimum. Exemplary measures for
reducing the vibration load include wearing gloves during
operation of the tool and the limitation of working hours.
All parts of an operating cycle must be considered for this
(e.g. times at which the power tool is switched off and
times when it is switched on but runs without load).
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PSCS11-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PSCS11-20V in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PSCS11-20V

Trotec PSCS11-20V User Manual - German - 19 pages

Trotec PSCS11-20V User Manual - Dutch - 19 pages

Trotec PSCS11-20V User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info