753295
13
Zoom out
Zoom in
Previous page
1/20
Next page
EN 13
cordless rotary hammer PRDS 20-20V
Adjusting the position of the additional handle
The additional handle is already preassembled. Do not use the
device without the additional handle.
The position of the additional handle may be adjusted by 360°
as required.
Please proceed as follows to adjust the position of the additional
handle:
1. Loosen the additional handle(14).
ðThe tensioner at the additional handle releases.
14
2. Turn the additional handle(14) into the desired position.
3. Retighten the additional handle(14).
4. Check the additional handle(14) for tight fit. If necessary,
tighten the additional handle further.
Inserting and using the depth stop (optional)
With the depth stop you can determine the penetration depth of
the drill bits.
Info
When using wall plugs, pay attention to the precise
drilling depth. If the drilled hole is too deep, the wall
plug will slide too far into the wall or workpiece. If the
hole is too small, the wall plug will protrude.
1. Loosen the screw connection of the additional handle(14)
by rotating the gripping surface to the left.
2. Insert the depth stop(9). When doing so, make sure that
the notches of the depth stop point to the device.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PRDS20-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PRDS20-20V in the language / languages: English as an attachment in your email.

The manual is 4,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PRDS20-20V

Trotec PRDS20-20V User Manual - German - 21 pages

Trotec PRDS20-20V User Manual - Dutch - 20 pages

Trotec PRDS20-20V User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info