753295
12
Zoom out
Zoom in
Previous page
1/20
Next page
12 EN
cordless rotary hammer PRDS 20-20V
Removing the battery
1. If necessary, push the additional handle (14) to the side
(see chapter Adjusting the position of the additional
handle).
2. Set the switch for clockwise/ counter-clockwise
rotation(3) to centre position(lock).
3. Detach the battery(8) from the device by pressing and
holding the unlocking button(12, I.) and pulling the battery
off the device(II.).
I.
II.
8
12
4. If required, charge the battery(8) as described in the
section Charging the battery.
Checking the battery charging status
The battery comes with an integrated battery level indication.
The battery status is displayed as follows by the three LEDs of
the battery level indication(11):
LED colour Meaning
Green – Orange – Red maximum charge/ power
Orange – Red medium charge/ power
Red weak charge – Recharge the
battery.
1. Press on the battery icon(18) on the battery(8).
ðYou can read the battery status from the battery level
indication(11).
18
11
Tool change
The device comes equipped with an SDS-plus system tool
holder.
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket and the battery from the device!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Please proceed as follows to remove or insert tools:
1. Set the switch for clockwise/ counter-clockwise
rotation(3) to centre position(lock).
2. Push the SDS-plus system tool holder(1) to the rear,
remove the tool from the tool holder (if any) and let go of
the tool holder.
3. Insert the desired tool (e.g. SDS drill bit,10) into the SDS-
plus system tool holder(1) and, if necessary, slightly turn it
until it clicks into place.
1
10
4. Check the tool for tight fit.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PRDS20-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PRDS20-20V in the language / languages: English as an attachment in your email.

The manual is 4,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PRDS20-20V

Trotec PRDS20-20V User Manual - German - 21 pages

Trotec PRDS20-20V User Manual - Dutch - 20 pages

Trotec PRDS20-20V User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info