753906
9
Zoom out
Zoom in
Previous page
1/15
Next page
EN 9
sabre saw PRCS 10-850
Start-up
Unpacking the device
Take the transport case out of the packaging.
Warning of electrical voltage
Electric shock from insufficient insulation.
Check the device for damages and proper functioning
before each use.
If you notice damages, no longer use the device.
Do not use the device when the device or your hands
are damp or wet!
Check the contents of the transport case for completeness
and look for damages.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Dispose of the packaging material according to the
national regulations.
Changing the saw blade
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Do not touch the mains plug with wet or damp hands.
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning of hot surface
The insertion tool might still be hot after the
application. Burn hazard when touching the insertion
tool.
Do not touch the insertion tool bare-handed!
Wear protective gloves!
Wear protective gloves
Wear appropriate protective gloves when inserting or
exchanging tools.
Note
Before changing the saw blade, remove any material
residues from the quick-release chuck.
As standard, the device is supplied with 3 saw blades for cutting
in wood and one saw blade for cutting in metal.
All saw blades having an S-shank or a ½''universal shank can
be used for this device. The saw blade should not be longer
than required for the cut. A narrow saw blade should be used
when sawing tight curves.
Please proceed as follows to remove or insert a saw blade:
1. Turn the quick-release chuck(10) to the side and hold it in
this position.
If required, you can remove the guide shoe to reach the
quick-release chuck more easily (see Adjusting the guide
shoe).
10
2. If a saw blade is inserted, remove the saw blade from the
quick-release chuck(10).
3. Insert the saw blade into the quick-release chuck. Make
sure that the teeth of the saw blade point downwards.
10
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PRCS 10-850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PRCS 10-850 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PRCS 10-850

Trotec PRCS 10-850 User Manual - German - 17 pages

Trotec PRCS 10-850 User Manual - Dutch - 17 pages

Trotec PRCS 10-850 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info