753366
13
Zoom out
Zoom in
Previous page
1/21
Next page
EN 13
cordless planer PPLS 10-20V
Adjusting the rebating depth stop
The rebating depth stop serves to adjust the depth of the
planing track on your workpiece.
Please proceed as follows to adjust the rebating depth stop:
1. Set the desired depth using the fastening screw(5) at the
rebating depth stop(12).
5
12
Info
If you are using the rebating depth stop and the rip
fence simultaneously, you can create steps with the
desired depth (rebating depth stop) and width(rip
fence).
Adjusting the chip ejector
You can mount the chip ejector on the left or right-hand side of
the device as needed.
The chip ejector is already preassembled.
Warning of hand injuries
Do not insert any limbs or objects into the chip ejector.
Crushing hazard if handled without due care.
Wear protective gloves!
Warning
Toxic dusts!
The harmful / toxic dusts produced during operation
pose of risk to the health of the operator and persons
in the vicinity.
Wear eye protection and a dust mask!
Please proceed as follows to attach the chip ejector to the other
side of the device:
1. Detach the chip ejector(2) by turning it in the opposite
direction of the arrow(LOCK).
2. Pull the chip ejector out of the device(2).
2
3. Clean the chip ejector if necessary.
4. Slide the chip ejector into the device on the other side. Pay
attention to the position of the opening at the device and of
the notch at the chip ejector while doing so.
5. Lock the chip ejector(2)by turning it fully in the direction
of the arrow(LOCK). The opening of the device and of the
chip ejector must fit each other precisely so that all dust
and chips produced will be discharged.
2
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PPLS10-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PPLS10-20V in the language / languages: English as an attachment in your email.

The manual is 4,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PPLS10-20V

Trotec PPLS10-20V User Manual - German - 21 pages

Trotec PPLS10-20V User Manual - Dutch - 21 pages

Trotec PPLS10-20V User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info