753285
9
Zoom out
Zoom in
Previous page
1/18
Next page
EN 9
Impact drill PHDS 10-230V
Start-up
Unpacking the device
Take the transport case out of the packaging.
Warning of electrical voltage
Electric shock from insufficient insulation.
Check the device for damages and proper functioning
before each use.
If you notice damages, no longer use the device.
Do not use the device when the device or your hands
are damp or wet!
Check the contents of the transport case for completeness
and look for damages.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Dispose of the packaging material according to the
national regulations.
Mounting the additional handle
The additional handle(8) should be mounted before start-up. Do
not use the device without the additional handle.
The position of the additional handle may be adjusted by 360°
as required.
To do so, please proceed as follows:
1. Loosen the screw connection of the additional handle(8)
by holding onto the top of the additional handle and
rotating the gripping surface to the left.
2. Fit the additional handle(8) on the device by pushing it
over the keyless drill chuck.
8
3. Turn the additional handle(8) into the desired position.
4. To fix the additional handle(8) in the desired position, slide
the additional handle back (8). Note that one of the
openings at the additional handle(8) must fit on the
protrusion at the device as shown below:
5. Tighten the screw connection of the additional handle(8)
by rotating the gripping surface to the right.
6. Check the additional handle(8) for tight fit. If necessary,
tighten the additional handle further.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PHDS 10-230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PHDS 10-230V in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PHDS 10-230V

Trotec PHDS 10-230V User Manual - German - 20 pages

Trotec PHDS 10-230V User Manual - Dutch - 20 pages

Trotec PHDS 10-230V User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info