753285
10
Zoom out
Zoom in
Previous page
1/18
Next page
10 EN
Impact drill PHDS 10-230V
Adjusting the position of the additional handle
The position of the additional handle may be adjusted by 360°
as required.
To do so, please proceed as follows:
1. Loosen the screw connection of the additional handle(8)
by rotating the gripping surface to the left.
2. Push the additional handle(8) to the front until it can be
freely rotated to the left and right.
8
3. Proceed as described in steps 3 to 6 in the chapter
Mounting the additional handle.
Tool change
The device is equipped with a keyless drill chuck with lock
function.
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Note
Only press the lock button when the device is at a
standstill! Otherwise the device might be damaged.
Please proceed as follows to remove or insert tools:
1. Press and hold the spindle lock button(2).
2. Open the keyless drill chuck(1).
2
1
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PHDS 10-230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PHDS 10-230V in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PHDS 10-230V

Trotec PHDS 10-230V User Manual - German - 20 pages

Trotec PHDS 10-230V User Manual - Dutch - 20 pages

Trotec PHDS 10-230V User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info