753918
13
Zoom out
Zoom in
Previous page
1/18
Next page
EN 13
belt sander PBSS 10-600
Switch the device on before applying it to the workpiece.
Once the grinding process is concluded, lift the device off
the workpiece before you switch it off.
Do not attempt to slow down the petering out abrasive belt
by pressing against it.
The non-binding values listed in the table below shall serve as a
point of reference for selecting the right abrasive belt and the
proper setting for the task at hand:
Material/ field of work Softwood
coarse sanding grain size: 60
fine sanding grain size: 240
belt speed selection high (5 – 6)
Material/ field of work Hardwood
coarse sanding grain size: 60
fine sanding grain size: 180
belt speed selection high (5 – 6)
Material/ field of work Chipboards
coarse sanding grain size: 60
fine sanding grain size: 150
belt speed selection high (5 – 6)
Material/ field of work Removing paint/ varnish
coarse sanding grain size: 60
belt speed selection high (5 – 6)
Material/ field of work Sanding down varnishes
coarse sanding grain size: 150
fine sanding grain size: 320
belt speed selection low (1 – 2)
Material/ field of work Derusting steel
coarse sanding grain size: 40
fine sanding grain size: 120
belt speed selection medium/ high (3 – 4)
Material/ field of work Plastics
coarse sanding grain size: 120
fine sanding grain size: 240
belt speed selection low/ medium (2 – 3)
Material/ field of work Non-ferrous metals
(e.g. aluminium)
coarse sanding grain size: 80
fine sanding grain size: 150
belt speed selection medium/ high (3 – 4)
Switching the device on and off
Wear your personal protective equipment when working with
the device.
1. Press the on/off switch(3).
3
2. Position the device on the workpiece.
3. Lift the device off the workpiece before you switch it off.
4. To switch the device off, release the on/off switch(3).
3
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PBSS 10-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PBSS 10-600 in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PBSS 10-600

Trotec PBSS 10-600 User Manual - German - 20 pages

Trotec PBSS 10-600 User Manual - Dutch - 19 pages

Trotec PBSS 10-600 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info