727660
13
Zoom out
Zoom in
Previous page
1/27
Next page
EN 13
local air conditioner PAC 3500 SH / PAC 3000 X A+
Setting the timer
The timer has two modes of operation:
automatic switch-on upon expiry of a preset number of
hours.
automatic switch-off upon expiry of a preset number of
hours.
This setting can be made at the device or using the remote
control.
Automatic switch-on and automatic switch-off may be enabled
at the same time. The timer LEDs(13) on the control panel will
then be illuminated simultaneously. When using the remote
control for setting, TIMER ON and TIMER OFF(36) will
additionally be indicated on the display(30) simultaneously.
The function can be set in all operating modes and also during
stand-by.
The number of hours can be set in increments
of 0.5hours (0h to 10h) or in increments
of 1hour (10h to 24h).
Note
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
Automatic switch-on
ü The device is switched off.
1. Press the Timer button(27) until the timeron LED(13) is
illuminated.
2. Set the desired number of hours by use of the Increase
value(24) and Decrease value(25) buttons.
ð The number of hours will be indicated on the segment
display(16) for approx. 5s.
ð The timer setting equals the desired number of hours.
ð After the predefined time, the device switches itself on.
Notes regarding automatic switch-on:
If the device is disconnected from the power supply, all
settings for automatic switch-on are deleted.
Manually switching the device on disables the automatic
switch-on function.
If you select 0.0hours, the timer will be off.
Automatic switch-off
ü The device is switched on.
1. Press the Timer button(27) until the timeroff LED(13) is
illuminated.
2. Set the desired number of hours by use of the Increase
value(24) and Decrease value(25) buttons.
ð The number of hours will be indicated on the segment
display(16) for approx. 5s.
ð The timer setting equals the desired number of hours.
ð After the predefined time, the device switches itself off.
Notes regarding automatic switch-off:
Pressing the On/ Off button(21) deactivates the automatic
switch-off function.
Night mode
Night mode can be activated in cooling or heating mode and
during automatic operation.
Night mode comes with the following settings:
After 1hour the preset temperature is increased or
reduced by 1°C. After another 30minutes the preset
temperature will again be increased or reduced by 1°C.
Then the temperature is kept constant for 7hours before
the device sets the original temperature automatically.
In automatic mode, the fan speed is preset to the lowest
stage and cannot be adjusted. In cooling mode, the fan
speed can be changed, which disables night mode.
To activate night mode, please proceed as follows:
1. Select cooling mode, heating mode or automatic operation.
2. Press the Sleep button(22).
ð The operating mode(14) and sleep LEDs(20) are
illuminated.
3. In order to switch the night mode off, press the Sleep
button(22) once again.
ð The sleep LED(20) turns off.
ð The selected operating mode remains active.
Swing function
The swing function can be switched on in any operating mode
if required.
By means of the swing function, the air outlet(2) is moved
automatically and thus ensures continuous air circulation.
1. Press the Swing button(28).
ð The ventilation flaps move up and down continuously.
2. Press the Swing button(28) again to stop the ventilation
flaps in a certain position and to switch off the swing
function.
Changing the unit °C / °F
The temperature in the segment display(16) can be
indicated in °C or °F.
Please proceed as follows to change the temperature unit:
1. Simultaneously press and hold the Increase value(24) and
Decrease value(25) buttons for approx. 3s.
ð The displayed temperature is converted to the other
unit.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PAC3000 XA plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PAC3000 XA plus in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PAC3000 XA plus

Trotec PAC3000 XA plus User Manual - German - 27 pages

Trotec PAC3000 XA plus User Manual - Dutch - 26 pages

Trotec PAC3000 XA plus User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info