727660
11
Zoom out
Zoom in
Previous page
1/27
Next page
EN 11
local air conditioner PAC 3500 SH / PAC 3000 X A+
Automatic operation
In automatic operation mode the cooling, heating (PAC3500SH)
or ventilation process will be regulated depending on the
ambient temperature and the target temperature.
1. Press the Mode button(26) until the LED for automatic
operation(14) is illuminated.
ð At a corresponding temperature difference between
ambient and target temperature the device
automatically switches over to cooling, heating or
ventilation mode. The LEDs for automatic operation(14)
and degrees Celsius(17) are illuminated. The fan speed
is regulated automatically.
Cooling
In cooling mode the room will be cooled down to the desired
target temperature.
1. Press the Mode button(26) until the cooling LED(14) is
illuminated.
ð Cooling mode is selected.
2. Repeatedly press the Increase value(24) or Decrease value
button(25) to select the desired target temperature. The
temperature can be adjusted in increments of 1°C in a
range between 17°C and 30°C.
ð The desired target temperature is indicated on the
segment display(16).
3. Press the Fan speed button(23) to set the desired fan
stage.
ð The fan speed LED(19) for the desired fan stage will be
illuminated.
ð The cooling LED(14) will be illuminated to indicate
cooling mode.
Dehumidification
In dehumidification mode the humidity level in the room is
reduced.
The temperature cannot be adjusted and the fan runs at the
lowest speed level.
Info
Remove the exhaust air hose during dehumidification,
otherwise the performance will be insufficient.
1. Press the Mode button(26) until the dehumidification
LED(14) is illuminated.
ð Dehumidification mode is selected.
ð The current room temperature is indicated on the
segment display(16).
ð The temperature and the fan stage (stage1) are preset
in this operating mode and cannot be changed.
Info
If the device is operated in a very humid environment,
the accumulating condensate must be discharged at
regular intervals (see chapter Condensate discharge).
Heating mode (PAC3500SH)
In heating mode the room will be heated up to the desired target
temperature.
1. Press the Mode button(26) until the heating LED(14) is
illuminated.
ð Heating mode is selected.
2. Repeatedly press the Increase value(24) or Decrease value
button(25) to select the desired target temperature.
The temperature can be adjusted in increments of 1°C in
a range between 17°C and 30°C.
ð The desired target temperature is indicated on the
segment display(16).
Info
After switch-off, the fan keeps running for a brief
period during which no settings can be made.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PAC3000 XA plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PAC3000 XA plus in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PAC3000 XA plus

Trotec PAC3000 XA plus User Manual - German - 27 pages

Trotec PAC3000 XA plus User Manual - Dutch - 26 pages

Trotec PAC3000 XA plus User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info