688783
13
Zoom out
Zoom in
Previous page
1/21
Next page
EN 13
local air conditioner PAC 2100 X / PAC 2600 X
Setting the timer
The timer has two modes of operation:
automatic switch-on upon expiry of a preset number of
hours
automatic switch-off upon expiry of a preset number of
hours
The timer can be programmed in increments of 0.5hours
(0 to 10h) or in increments of 1hour (10 to 24h).
This setting can only be made using the remote control.
The function can be set in all operating modes. It can be
activated both during operation and in standby mode.
Automatic switch-on and automatic switch-off may be enabled
at the same time. If so, Timer On and Timer Off will both be
displayed simultaneously.
Note
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
Automatic switch-on
ü The device is switched off.
1. Press the TIMER ON button(21) to activate the timer.
2. Hold or repeatedly press the TIMER ON button(21) to
select the desired number of hours until automatic
switch-on.
3. Wait for 3seconds to confirm the setting.
ð The number of hours until automatic switch-on will be
indicated for approx. 3s both on the display(19) and
the segment display(15).
ð The Timer On setting will also be indicated on the
display(19).
ð A dot will be indicated in the bottom right corner of the
segment display(15).
ð After the predefined time, the device switches itself on.
Notes regarding automatic switch-on:
If the device is disconnected from the power supply, all
settings for automatic switch-on are deleted.
Manually switching the device on disables the automatic
switch-on function.
If you select 0hours, the timer will be off.
Automatic switch-off
ü The device is switched on.
1. Press the TIMER OFF button(22) to activate the timer.
2. Hold or repeatedly press the TIMER OFF button(22) to
select the desired number of hours until automatic
switch-off.
3. Wait for 3seconds to confirm the setting.
ð The number of hours until automatic switch-on will be
indicated for approx. 3s both on the display(19) and
the segment display(15).
ð The Timer Off setting will also be indicated on the
display(19).
ð A dot will be indicated in the bottom right corner of the
segment display(15).
ð After the predefined time, the device switches itself off.
Automatic operation
During automatic operation cooling and ventilation are regulated
depending on the ambient and target temperature.
This setting can only be made using the remote control.
1. Use the MODE button(27) to select Auto mode.
ð Auto mode is displayed in the operating mode
indication(35).
Night mode
Night mode can be activated in cooling mode and during
automatic operation.
This setting can only be made using the remote control.
Night mode comes with the following settings:
After 30minutes the preset temperature is increased by
1°C. After 1hour the preset temperature will again be
increased by 1°C. Then the temperature is kept constant
for 7hours.
Subsequently, the device switches back to the preset
temperature from before night mode.
Ventilation is preset to the automatic stage and cannot be
adjusted.
To activate night mode, please proceed as follows:
1. Select cooling mode or automatic operation.
2. Press the SLEEP button(24).
ð Both the night mode and the automatic stage will be
indicated on the display(19).
3. In order to switch the night mode off, press the
SLEEP button(24) once again.
ð The night mode indication(32) disappears.
ð The automatic stage remains unaffected.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PAC2100X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PAC2100X in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PAC2100X

Trotec PAC2100X User Manual - German - 22 pages

Trotec PAC2100X User Manual - Dutch - 22 pages

Trotec PAC2100X User Manual - French - 23 pages

Trotec PAC2100X User Manual - Spanish - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info