753327
11
Zoom out
Zoom in
Previous page
1/14
Next page
EN 11
heat gun HyStream 2000
Temperature regulation
The temperature of the cold setting1 is set at 50°C, in the hot
air setting2 the temperature can be steplessly adjusted.
1. In order to work at 50°C, slide the on/off switch(2) to
position1.
2. To achieve a higher temperature, slide the on/off switch(2)
to position2.
3. Select the desired temperature range by use of the plus/
minus buttons(13): the temperature can be adjusted
between 50°C and 650°C in increments of 10°C.
13
4. If you press the plus/ minus buttons(13) briefly, the
temperature changes by 10°C.
5. If you press and hold the buttons a bit longer, the
temperature will be repeatedly increased or lowered by
10°C until you let go or the maximum or minimum
temperature has been reached.
6. The symbol indicating the warm-up phase(14) flashes
until the desired temperature value is reached. After that it
is permanently displayed.
The target temperature is only indicated on the display(5) for a
brief period. Then the current temperature indication returns to
the display. This value will be increased or reduced to the target
temperature. Upon reaching the target temperature, it will be
indicated on the display(5).
Regulating the air flow rate
Info
Regardless of the position of the on/off switch (stage1
or2), the fan stage can be adjusted at any time.
1. Select the desired fan speed by means of the plus/ minus
buttons(12): the air flow rate can be adjusted in 5stages.
2. Briefly press the plus/ minus buttons(12) to increase or
reduce the fan speed.
12
3. If you press and hold the buttons a bit longer, the flow rate
will be repeatedly increased or lowered until you let go or
the maximum or minimum flow rate has been reached.
Stage Air flow rate Air temperature
Stage 1
Stage 2
250 – 500l/min
250 – 500l/min
50°C
50 – 650°C
The cold setting1 is suited for cooling down a hot workpiece or
for drying paint. Furthermore, it serves the purpose of cooling
the device down before exchanging the attachment nozzles or
before putting the device itself down.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec HyStream 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec HyStream 2000 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec HyStream 2000

Trotec HyStream 2000 User Manual - German - 15 pages

Trotec HyStream 2000 User Manual - Dutch - 15 pages

Trotec HyStream 2000 User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info