753327
4
Zoom out
Zoom in
Previous page
1/14
Next page
4 EN
heat gun HyStream 2000
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
General Power Tool Safety Warnings– Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Device-specific safety warnings for heat guns
Negligent handling of the device may result in a fire.
Proceed with caution when using the power tool near
combustible materials.
Do not point the device at the same spot over a longer
period of time.
Do not use the device in a potentially explosive
atmosphere.
The heat can reach combustible materials which are
covered.
After use put down the power tool in an upright position
on the provided stand with the air outlet pointing
upward.
Do not leave the power tool unattended while in
operation.
Do not look directly into the nozzle opening at the air
outlet.
Never direct the hot air current at people or animals.
Never direct the hot air directly at a window or other glass
surfaces.
Never obstruct the hot air current by blocking or covering
the air outlet.
Do not use the power tool in wet surroundings or in areas
with an increased humidity level.
Do not use the suspension eye on the power cable as
transport aid.
Keep a sufficient distance between the air outlet and the
workpiece or the surface to be processed. An
accumulation of air can lead to overheating of the power
tool.
Allow the power tool to cool down sufficiently before
storing it away. The power tool, especially the air outlet, is
still very hot and can thus cause damage.
Intended use
The device was developed for the purpose of generating hot air
and may only be used whilst adhering to the technical data.
Only use the device
to remove flooring
to shrink foils and shrinking hoses
to dry incombustible paints and varnishes, damp objects or
grounds
to remove incombustible paints and varnishes
to bend and heat-seal plastics
to melt and thaw incombustible parts
for soldering and tin-coating
for dissolving adhesive bonds
ONLY with barbecue lighter nozzle: to light a barbecue
We recommend using the power tool with original Trotec
accessories.
Foreseeable misuse
The device is not intended to be used as a hairdryer.
The device is not intended for drying clothing.
The device is not intended to be used in combination with
chemical removers or solvents.
The device is not intended to be used for preparing food.
Any other use than the one described in the chapter "Intended
use" is regarded as reasonably foreseeable misuse.
Personnel qualifications
People who use this device must:
have read and understood the operating manual, especially
the Safety chapter.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec HyStream 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec HyStream 2000 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec HyStream 2000

Trotec HyStream 2000 User Manual - German - 15 pages

Trotec HyStream 2000 User Manual - Dutch - 15 pages

Trotec HyStream 2000 User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info