Manual Trotec DH 300 (page 23 of 64) (English, German, French)

580099

Zoom out

Zoom in

1/64

Operating manual – DH 150 / 300 / 600

B - 2

2.2 AIR CIRCULATION

It is important that you ensure that the air is distri-

buted evenly throughout the room in order to ensure

that the humidity is drawn out of the ambient air as

effectively as possible and that the humidity value you

have selected is maintained constantly. Your dehumi-

diﬁer must be able to draw in moist air and distribu-

te the air which has been dried to areas which are

commonly affected by high levels of moisture (e. g.

windows). This is why your dehumidiﬁer is equipped

with special ventilation channels and ducts.

The drier and the ventilation channels work

at normal temperatures. If they come into

contact with unheated rooms because the ventilati-

on channels are conducted through unheated cellars

or attics for example, then these channels must be

insulated accordingly.

Drawing in air from moister areas:

The moist air must be fed into the drier in as small

amounts as possible. There is no need for ventilation

channels if the dehumidiﬁer is placed in an adjoining

room.

Discharging dry air back into the room:

You will ﬁnd that it is often necessary to install ventila-

tion channels to ensure that the dried air is distributed

as evenly as possible. See the technical data sheet to

ﬁnd out which ventilation channels, ventilation grilles,

grilles and air heating batteries are suitable for which

speciﬁc quantities of air and which different pressure

values.

IMPORTANT NOTES:

• It must be ensured that the nozzle which measures

the relative humidity at the air intake duct is also

able to measure the moisture from any installed

ventilation channels (see installation plan).

•All models are standard equipped with a nozzle for

the discharged air.

• The air discharge nozzles and air ﬁlters are available

from specialist stores. DO NOT drill into the unit to

ﬁt either the nozzle or air ﬁlter.

•A ﬂexible adapter made of rubber or fabric should

be placed between the ventilation channels and the

nozzle to prevent any vibrations from being transferred.

• Remove any cover lids or air grilles before the air

ventilation channels are connected.

• Check the unit, the grilles and the airﬂow thoroughly

when you have completed installing the unit. The

air ﬂow must correspond to the amount stated

on the technical data sheet (± 10 %) and should be

adjusted, if necessary, using the main sluice valve.

If the air ﬂow does not correspond to the prescribed

amount, then the performance of your dehumidiﬁer

will not be achieved.

• TABLE 1. Open space which is necessary to ensure

that sufﬁcient air ﬂow is guaranteed when the unit

is installed in a separate room and wall break-

throughs are planned.

Model DH150:

Minimum open space air inlet amount = 0.35 m².

Model DH300:

Minimum open space air inlet amount = 0.57 m².

Model DH600:

Minimum open space air inlet amount = 1.1 m².

If more than one unit has been installed in

a closed area, the open spaces which are

necessary to ensure that the dehumidiﬁers per-

form as intended can be added together to form a

common air inlet opening. The air discharge ducts

should be connected to separate ventilation chan-

nels or separated by nonreturn valves in order to

prevent the air from ﬂowing back into other ma-

chines.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trotec DH 300 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trotec DH 300 Manual

Product: