756392
6
Zoom out
Zoom in
Previous page
1/18
Next page
6 EN
layer thickness measuring device BB30
Operation
Inserting the batteries
Insert the supplied batteries before first use.
Note
Make sure that the surface of the device is dry and the
device is switched off.
5
1. Push down the clip at the cover of the battery
compartment(5) and remove the cover.
2. If applicable, remove old batteries from the battery
compartment.
3. Insert the new batteries in the battery compartment with
correct polarity.
4. Put the cover back onto the battery compartment and
press the side with the clip down until it clicks into place.
Connecting the extension cable
You can connect the extension cable for the measuring head so
as to reach poorly accessible locations.
To do so, please proceed as follows:
1. Disconnect the measuring head(3) from the device by
pressing both release buttons and pulling the measuring
head off.
BB30
3
2. Connect the measuring head side of the extension
cable(7) to the measuring head(3). Please note that there
is only one position that permits the extension cable to be
plugged in.
7
3
3. Connect the device side of the extension cable(6) to the
device by pressing both release buttons and attaching the
connector. Please note that the connection can only be
established in one way.
BB30
6
Switching the device on
Info
Note that moving from a cold area to a warm area can
lead to condensation forming on the device's circuit
board. This physical and unavoidable effect can falsify
the measurement. In this case, the display shows
either no measured values or they are incorrect. Wait a
few minutes until the device has become adjusted to
the changed conditions before carrying out a
measurement.
1. Press the Power button(8) for approx. 2seconds.
ðThe display will be switched on and the device ready for
operation.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec BB30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec BB30 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec BB30

Trotec BB30 User Manual - German - 18 pages

Trotec BB30 User Manual - Dutch - 18 pages

Trotec BB30 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info