795072
8
Zoom out
Zoom in
Previous page
1/17
Next page
8 EN
humidifier B 3 E / B 4 E
Operation
Avoid open doors and windows.
Make sure that there are no moisture-sensitive objects
located in the immediate vicinity of the mist nozzle, since
water may condense near the mist nozzle.
Operating elements
26
24
18
20
22
27
19
21
25
23
No. Designation Meaning
18 Timer LEDs Indicates the selected number of
hours (2-12h in combination from
the symbols 2h, 4h, 6h. The sum of
the symbols indicates the desired
number of hours.)
19 UV lamp LED Is illuminated when the UV lamp is
activated
20 Low water level
LED
Flashes permanently when water
tank is low
Flashes 3times in succession when
the dry run protection is activated
21 On/off LED Illuminated when the device is
switched on
22 Timer button Switching the timer function on or off
23 UV lamp button For switching the UV lamp on or off
24 On/off button For switching the device on or off
25 Water level
indicator button
For switching the water level
indication lamp on or off
26 Nebulizer intensity
button
Select nebulizer intensity
27 Nebulizer intensity
LEDs
Indicate the nebulizer intensity
selected (level 1, 2 or 3)
Switching the device on
Info
If no operational input is made for40s, the control
panel(6) switches off.
1. Make sure that the water tank(4) has been filled with
drinking water.
2. Make sure that the device is neither damp nor wet on the
outside. Otherwise wipe it dry.
3. Press the On/off button(24).
ðThe nebulizer intensity LED(27) indicates the nebulizer
intensity at level1 an .
ðThe device starts to humidify. Fine water mist leaves the
mist nozzle(2).
Setting the nebulizer intensity
The nebulizer intensity can be set to 3levels:
Stage1: Low nebulizer intensity
Stage2: Medium nebulizer intensity
Stage3: High nebulizer intensity
üThe device is switched on.
1. Press the Nebulizer intensity button(26).
ðLED "1” of the nebulizer intensity LEDs(27), is
illuminated for the first level.
2. Repeat the process for stage2 or3.
ðThe device now operates with the desired nebulizer
intensity.
Setting the operating mode
You can select the following operating mode:
Manual humidification
Manual humidification
The nebulizer intensity can be set to level1–3 in this operating
mode at any time(continuous humidification regardless of the
humidity level in the room).
Timer function
For the device to switch off automatically after a predefined
number of hours (2 to 12h) you can program the timer. The
timer can be programmed in increments of 2hours.
Automatic switch-off
1. Press the timer button(22) once to program the timer to
2hours.
ðLED “2”of the timer LEDs(18) is illuminated.
ðThe device switches off automatically after 2hours.
2. Press the timer button(22) again to program the timer to
up to 12hours.
ðThe desired number of hours lights up as a combination
of the three LEDs.
Notes regarding automatic switch-off:
Pressing the On/off button(24) deactivates the automatic
switch-off function.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec B4E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec B4E in the language / languages: English as an attachment in your email.

The manual is 4.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info