737494
30
Zoom out
Zoom in
Previous page
1/34
Next page
- 28 -
Commissioning
Before taking the Battery Charger into use,
check that all items are complete/available and
free of visible damage.
Place the Battery Charger on a straight, level,
scratch and slip resistant surface.
Notice:
This appliance is equipped with non slip rubber feet.
As furniture surfaces may be made of a variety of
materials and are treated with many different types
of cleaning agents, it cannot be completely ruled
out that some substances contain ingredients which
may corrode the rubber feet and soften them. If pos
sible, place an anti slip material under the device.
Compare the technical data with that of your
current mains power supplier. If they are the
same, connect the power cable to a mains
power socket. The LEDs blink red three times.
The Battery Charger is now ready for use.
Charging batteries
Danger!
Charge exclusively rechargable batteries of the
types „Ni Cd“ and „Ni MH“.
NEVER recharge batteries of other types or non
rechargable batteries. These are not suitable for
recharging. They could irreparably damage the
Battery Charger and the inserted batteries. There is
also the danger of a fire as well as an explosion!
Notice:
Ensure that the batteries are inserted into the
charging slots in accordance with their polarities.
Otherwise, the batteries will not be charged.
Insert the batteries into the charging slots.
Press the 9 V Block batteries into the charging
slot until they audibly engage.
1 to 8 batteries can be individually charged:
4 x Type C or Type D batteries in the charging
slots 1 to 4, with additionally 2 x Type 9 Volt
Block batteries in the charging slots 5 and 6.
or
6 x Type AA or AAA batteries in the charging
slots 1 to 4, with additionally 2 x Type 9 Volt
Block batteries in the charging slots 5 and 6.
The charging process now begins. The Battery
Charger has an LED for each charging slot. The
LEDs of the charging slots indicate the charge
state of the battery they contain.
In the first 5 seconds the Battery Charger carries
out a capacity test:
The LED of the charging slot glows green:
The battery capacity lies over 90 %.
The LED of the charging slot glows orange:
The battery capacity lies between 80 % 90 %.
The LED of the charging slot glows red:
The battery capacity lies under 80 %.
The LED of the charging slot blinks red :
The battery is not properly inserted into the
charging slot or is defect.
When the battery capacity has been determined,
the charging process begins.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tronic TLG 1000 A1 IAN 52183 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tronic TLG 1000 A1 IAN 52183 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tronic TLG 1000 A1 IAN 52183

Tronic TLG 1000 A1 IAN 52183 User Manual - German, Dutch, French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info