737494
31
Zoom out
Zoom in
Previous page
1/34
Next page
- 29 -
The various indicators have the following meanings:
The LED blinks alternatively red and green:
The batteries are being charged and discharged
alternately. (Refresh function: With this, older
batteries or batteries that have been stored for
a long time will be refreshed.)
The LED blinks green:
The batteries are being charged by a battery
preserving impulse charge.
The LED continuously glows red:
The batteries are being charged with the maximum
charge current.
The LED continuously glows green:
The batteries are fully charged and the Battery
Charger has switched to a trickle charge.
Notice:
Should Type C or D batteries be charged in the outer
charging slots, the operating condition is displayed
by the respective outer LEDs.
Warning!
The batteries could become hot during charging.
NEVER touch hot batteries! There is a danger of
being burnt!
Remove the power cable of the Battery Charger
from the plug socket and allow the batteries to
cool down.
Afterwards you can remove the charged batteries
from the Battery Charger.
Calculating the average charging time
Dependant on the type, age and remaining battery
charge, hence the charging process takes different
lengths of time. The average charging times can be
calculated using the following formula.
Note, however, that the times calculated are only
indicative.
Current time (Min.) =
Capacity of t
he battery (mAh) x 1,5 x 60
Charging current of the appliance (mA)
Automatic charging control/
Retention charging
This Battery Charger controls the charging time for
rechargable batteries of the types Ni Cd and Ni MH
separately. This control is based on the Δ U
(„minus Delta U“) calculation.
In mathematics, with Delta Δ differences are
described.
„Minus Delta U“ in this case means a negative
voltage difference.
This charge identification makes itself useful in the
following effects:
Should a battery be charged with a constant current,
its voltage rises continuously. When the battery is
full, its voltage reaches a maximum and falls lightly
with further current flow. This light fall in voltage is
recognised by the charging electronics and the
charge process is terminated. The Battery Charger
automatically switches to „Retention charging“.
This means that the batteries are no longer being
charged with continuous power, but with short power
impulses instead. This counteracts the process of
self discharge, thus retaining the batteries in a fully
charged condition.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tronic TLG 1000 A1 IAN 52183 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tronic TLG 1000 A1 IAN 52183 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tronic TLG 1000 A1 IAN 52183

Tronic TLG 1000 A1 IAN 52183 User Manual - German, Dutch, French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info