665033
8
Zoom out
Zoom in
Previous page
1/40
Next page
8
GB
Troubleshooting
Problem Possible cause Solution
Red charging LED does not illuminate and battery
not charging
Battery not fully seated Clean battery socket of charger
Charger not powered Recheck mains connection
Battery pack has low capacity
Battery not being fully charged Charge the battery until the charger indicates a
full charge
Battery pack has been charged over 100 times
and capacity has started to reduce
This is normal for batteries. Contact your Triton
dealer to purchase a replacement battery
Drill cannot be switched on (trigger switch does
not move)
The forward/reverse switch may be in the middle
(‘locked’) position
Slide the forward/reverse switch either to the
left or right
Drill does not start when on/off trigger switch is
depressed
Battery completely discharged Recharge battery or replace with a fully
charged battery
Defective battery Replace battery
Machine defective Contact your Triton dealer or authorised
service centre
Screws do not reach deep enough into the
workpiece
Not enough torque; torque clutch setting too low Choose a higher torque setting
Low battery voltage Recharge battery or replace with a fully
charged battery
Screws are driven too deep into the workpiece
surface
Too much torque; torque clutch setting too high Choose a lower torque setting
During masonry drilling the drill bit does not
penetrate the wall
Unsuitable or blunt drill bit Replace drill bit with a new high quality masonry
drill bit
Drill bit too large See ‘Specifications’ for maximum
drilling capacities
Drill not set to hammer mode Rotate mode selector to switch the machine into
hammer drill mode (see ‘Mode Selection’)
Accessories
A range of accessories, including a 2Ah battery (T20B), 4Ah high capacity battery
(T20HCB), drill and screwdriver bits is available from your Triton dealer. Spare parts can be
purchased from your Triton dealer or online at www.toolsparesonline.com
Maintenance
This tool is manufactured using class-leading components and makes use of the latest
in intelligent circuitry that protects the tool and its components. In normal use it should
provide a long working life
Cleaning
Keep your machine clean at all times. Dirt and dust will cause internal parts to wear
quickly, and shorten the machine’s service life. Clean the body of your machine with a
soft brush or dry cloth. If available, use clean, dry, compressed air to blow through the
ventilation holes
Storage
Store this tool and its accessories after use in its case, in a dry, secure place out of the
reach of children
Disposal
Always adhere to national regulations when disposing of power tools that are no longer
functional and are not viable for repair.
Do not dispose of power tools, batteries or other waste electrical and electronic equipment
(WEEE), with household waste
Contact your local waste disposal authority for information on the correct way to dispose
of power tools and batteries
100901_Z1MANPRO1.indd 8 11/07/2016 14:39
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triton T20CH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triton T20CH in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info