665183

Triton MSA 200 Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
6
GB
Folding and Unfolding
• The Triton Multi-Stand quickly and easily folds for convenient storage, (Image I):
1. Loosen the Height Adjustment Clamping Screw (6)
2. Slide the Column (5) in as far as it goes, and tighten the Height Adjustment Clamping
Screw
3. Loosen the Tilt Head Clamping Screw (4), tilt the Tilt Head (1) into the vertical position
4. Fold in all three Tripod Legs (8)
Note: To unfold the Triton Multi-Stand, follow the above steps in reverse order.
Operation
Positioning and Adjusting
WARNING: Always use theTriton Multi-Stand in a stable position. If the ground is uneven or
sloping, the stand must be secured to the ground by using suitable fasteners, such as screws,
nails or pegs, through the holes in the Rubber Coated Feet (7).
• The Triton Multi-Stand features a Tilt Head (1) that can be adjusted horizontally (0°),
vertically (90°), or in any angle between 0 and 90°:
1. Loosen the Tilt Head Clamping Screw (4)
2. Adjust the Tilt Head (1) into the required position
3. Tighten the Tilt Head Clamping Screw
Clamping
• The inside surface of the Tilt Head (1) features an adjustable serrated clamp that can be
used to hold a workpiece:
1. Loosen the Workpiece Clamping Screw (3) to adjust the serrated clamp, so it fits the
workpiece
2. Insert the work piece into the Head Channel (9) and close the Workpiece Clamping Screw
tightly (Image II)
WARNING: The serrated clamp may leave an imprint on the workpiece when clamping. Use
a shim or thin spacer between the serrated clamp and the workpiece, to keep it in pristine
condition.
Use as Sliding Work Support
• TheTriton Multi-Stand can be used as an infeed or outfeed support, sliding the workpiece
over the horizontal low-friction surface of the Tilt Head (1)
• Where additional height is needed, clamp an object with smooth surface, e.g. a piece of
wood, into the Tilt Head (as described in ‘Clamping’), to extend the height of the Triton
Multi-Stand, (Image III)
Building Work Supports
• Two or more Triton Multi-Stands can be used to build a variety of customised work
supports, (Image IV)
Accessories
• Visit www.tritontools.com to see the full range of Triton work supports and precision
power tools
Maintenance
• Inspect the Triton Multi-Stand before every use. DO NOT use if any kind of damage is
detected (deformation, corrosion, damaged welds etc.). The device may not be fit for
service and needs to be inspected by a qualified Triton technician
• Clean the body of the Triton Multi-Stand with a soft brush or dry cloth
• If the Triton Multi-Stand has become wet, dry thoroughly before storage
• From time to time, or after contact with water, the clamping screws, column and tilting
mechanism should be lightly lubricated with a suitable maintenance spray
Storage
• Store the Triton Multi-Stand carefully in a secure, dry place out of the reach of children
330090_Z1MANPRO1.indd 6 30/09/2014 09:38
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triton MSA 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triton MSA 200 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info