483963
6
Zoom out
Zoom in
Previous page
1/60
Next page
6
MAINTENANCE AND CLEANING
Note: Before any maintenance or cleaning operations, please turn the
temperature knob on minimum position, unplug your steam generator
from the power socket and allow it to cool down completely.
Empty the water tank
Unscrew the water tank lter cap.
Empty the boiler above a sink.
Turn the boiler cap back on the unit.
Steam generator cleaning
Clean the soleplate with a vinegar-water solution.
Clean the base and iron with a damp cloth and dry it completely before
storage.
To not damage the soleplate, we advise you never put the soleplate on
a metal surface.
Clean your steam generator after every 10 times of use.
Boiler cleaning
Unscrew the boiler lter cap.
Fill it with near of 250mL of clear water.
Fix the boiler lter cap.
Shake the base unit for a few moments and then empty it completely.
In order to obtain the best result, we recommend to repeat this action
twice.
Type of water to use
You can use normal tap water to ll the tank. Therefore, especially if
your tap water is very hard, we advise you to mix it with distilled water
or use distilled water only.
We advise you to empty the water tank after use in order prevent
limestone inside the water tank.
Do not add anything to the contents of the boiler and do not use
water from clothes dryers, scented or softened water, water from
refrigerators, batteries, air conditioners and rain water. These contain
organic waste or mineral elements that become concentrated when
heated and cause spitting, brown staining or premature wear to the
steam generator. Use of these types of water will negate the guarantee
provided with the product.
IRONING OF YOUR LINENS
In order to not damage your linen, please check the type of requested
ironing including on care and composition label. Adjust the ironing
temperatures before use your iron.
Symbol Fabric Temp. Variable steam
Synthetic bers/silk ×
Wool
Cotton / Linen
Note:
The symbol means: This article cannot be ironed!
Note:
The symbol means: This article cannot be ironed!
Instruction manual
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar ST-8911 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar ST-8911 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info