483963

Tristar ST-8911 Manual

5
Zoom out
Zoom in
Previous page
1/60
Next page
5
EN
BEFORE THE FIRST USE
• Before the rst use, please remove any sticker or protective cover.
• Place your steam generator on a stable, horizontal heat-resistant
surface.
• For the rst use, use the iron on an old piece of fabric to ensure the
soleplate and water tank are completely clean.
• Never use the steam generator when water tank is empty, rell it
before use it again.
Fill the water tank
• Before lling the water tank, check if the steam generator is cooled
down, if the power cable is unplugged and if the temperature knob is
on its minimum position.
• Note: never unscrew the boiler cap before these three steps are done.
• During lling please do not exceed the maximum water capacity (0.5L).
• Note: use a funnel to ll the boiler.
• Please read carefully our advices in chapter “type of water to use”
concerning the water to use with your steam generator.
• Open the boiler lter cap and ll the boiler with water.
• Screw the boiler lter cap tight.
• Notes: if the water tank indicator illuminates and there is no steam the
water tank is empty.
• Never unscrew the boiler cap when the appliance is still connected to
the power supply.
Select the temperature
• Place the iron on its base.
• Select the desired temperature by using the thermostat knob, check the
ironing symbols on your clothes in order to adapt the ironing temperature.
• Note: we advise you to read the chapter “Ironing of your linens” in order
to select the best ironing temperature.
STEAM IRONING
Note: For the rst use, use the iron on an old piece of fabric to ensure the
soleplate and water tank are completely clean.
• Fill the boiler and select the temperature as described before.
• Plug the power cable into the wall outlet.
• Turn on the device by using the ON/OFF button, the unit will be heated up.
• It will take around 5 minutes to produce enough steam, the steam
ready and empty water tank indicator light will be illuminate when the
iron is ready for use.
• Note: Do not use the steam function before the steam ready indicator
illuminates.
• There are two ways to obtain steam,
o Press on the steam switch button beneath the iron handle and keep
it pressed. The steam will stop when you release the button.
o By pressing the steam lock button steam and slide the steam lock
backwards, the iron will steam now constantly.
Note: The rst time the steam generator is used, there may be some smoke
and smell, this is not harmful. They will not aect the performance and will
disappear rapidly.
AFTER USE
• Put the temperature knob on minimum position.
• Turn o the device by using the ON/OFF button.
• Unplug the power cable.
• Wait until the steam generator and the soleplate are cooled down
completely.
• Unscrew the boiler cap and pour out the remaining water then place
the boiler cap back on the unit.
Steam generator iron
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar ST-8911 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar ST-8911 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info