549620
5
Zoom out
Zoom in
Previous page
1/28
Next page
5
EN
BEFORE THE FIRST USE
Take the appliance andaccessoriesoutthebox.Removethe
stickers,protective foilorplasticfrom thedevice.
Before using your appliance for the rst time, wipe o all removable
parts with a damp cloth. Never use abrasive products.
Putthepower cable intothe socket.(Note: Make surethe
voltagewhich is indicated on the devicematchesthe localvoltage
beforeconnecting the device.Voltage220V-240V 50/60Hz)
Place the device on a at stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
Special safety instructions for this machine
Only operate this machine under supervision.
Do not interfere with any safety switches.
Do not insert anything into the rotating hooks while the machine is working.
Place the machine on a smooth, at and stable working surface.
Do not insert the mains plug of the machine into the power socket
without having installed all the necessary accessories.
USE
In order to lift the arm, push the latch. The arm will now move upwards.
Remove the mixing bowl by turning it anticlockwise.
Mount the required utensil by inserting the top into the output shaft
and lock it by turning the utensil anticlockwise.
Now ll the mixing bowl with your ingredients.
Install the mixing bowl by turning it clockwise until it is locked.
Lower the arm by using the lift arm and press the arm down.
Insert the mains plug into a properly installed safety power socket.
Switch on the machine by using a speedlevel between 1 and 5
(corresponding to the mixture and accessory which is used).
After kneading/stirring/whisking use the "OFF" button to turn o the
appliance. Then remove the mains plug.
Press the lift arm downwards and the arm will be raised.
The mixing bowl can now be removed by turning the bowl anticlockwise.
Remove the mixture out of the bowl with the help of a spatula.
Clean the parts as described under “Cleaning” .
The appliance will automatic switch to the OFF mode according to the
table below.
Speed Setting Default Timer
1 90 sec.
2 6 min. 30 sec.
3 9 min.
4 9 min.
5 9 min.
How to remove and install the lid
Install: make sure the lid ts properly in the notches, push and turn it
clockwise
Remove: push and turn it anti-clockwise.
How to remove and install the dough hook, whisk or beater.
Install: make sure the utensil ts properly in the notches of the shaft,
push and turn it anti clockwise.
Remove: push and turn it clockwise.
Multi mixer with bowl
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar MX-4174 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar MX-4174 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info