379982

Tristar bm 4584 Manual

17
Zoom out
Zoom in
Previous page
1/78
Next page
Warning display
1. If the display shows “H HH” after the program has been started, the temperature inside is still too
high. Then the program has to be stopped. Open the lid and let the machine cool down for 10 to 20
minutes.
2. If the display shows “E E0” or “E E1”after you have touched START/STOP, the temperature sensor
is malfunction please check the sensor carefully by Authorized expert.
Before the first use
1. Please check whether all parts and accessories are complete and free of damage.
2. Clean all the parts according to the section“Cleaning and Maintenance”.
3. Set the bread maker on BAKE mode and bake empty for about 10 minutes. Then let it cool down
and clean all the detached parts again.
4. Dry all parts thoroughly and assemble them, the appliance is ready for using.
How to make bread
1. Place the bread pan in position, then turning it in clockwise until they click in correct position. Fix
the kneading blade onto the drive shaft. It is recommended to fill hole with heat-resisting margarine
prior to place the kneading blade to avoid the dough sticking the kneading blade, also this would
make the kneading blade be removed from bread easily.
2. Place ingredients into the bread pan. Please keep to the order mentioned in the recipe. Usually the
water or liquid substance should be put firstly, then add sugar, salt and flour, always add yeast or
baking powder as the last ingredient.
水或 液体
干的 配料
酵母 或苏打
Yeast or soda
Dry ingredients
Water or liquid
Note: the maximum quantities of the flour and yeast which may be used refer to the recipe.
3. Make a small indentation on the top of flour with finger, add yeast into the indentation, make sure
it does not come into contact with the liquid or salt.
4. Close the lid gently and plug the power cord into a wall outlet.
5. Touch the Menu button until your desired program is selected.
6. Touch the COLOR button to select the desired crust color.
7. Touch the LOAF button to select the desired size. (1.5LB or 2.0LB)
8. Set the delay time by touching Time button. This step may be skipped if you want the bread maker
to start working immediately.
9. Touch the START/STOP button for approx. 2 seconds to start working.
10. For the program of BASIC, WHOLE WHEAT, FRENCH, QUICK, SWEET, CAKE, ULTRA-FAST and
HOME-MADE beeps sound will be heard during operation. This is to prompt you to add ingredients.
Open the Lid and put in some ingredients. It is possible that steam will escape through the vent in the
lid during baking. This is normal.
11. Once the process has been completed, one beep will be heard. You can touch START/STOP
button for approx. 2 seconds to stop the process and take out the bread. Open the Lid and while
using oven mitts, turn the bread pan in anti-clockwise and take out the bread pan.
Caution: the Bread pan and bread may be very hot! Always handle with care.
12. Let the bread pan cool down before removing the bread. Then use non-stick spatula to gently
loosen the sides of the bread from the pan.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar bm 4584 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar bm 4584 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info