Start/stop
For starting and stopping the selected baking program.
To start a program, touch the “START/STOP” button once. A short beep will be heard and the two
dots in the time display begin to flash and the program starts. Any other button is inactivated except
the START/STOP, LIGHT LAMP and PAUSE buttons after a program has begun.
To stop the program, touch the “START/STOP” button for approx. 1.5 seconds, then a beep will be
heard, it means that the program has been switched off. This feature will help to prevent any
unintentional disruption to the operation of program.
Menu
It is used to set different programs. Each time it is touched (accompanied by a short beep) the
program will vary. Touch the button discontinuously, the 12 menus will be cycled to show on the LCD
display. Select your desired program. The functions of 12 menus will be explained below.
1. Basic: kneading, rise and baking normal bread. You may also add ingredients to increase flavor.
2. Whole wheat: kneading, rise and baking of whole wheat bread. It is not advised to use the delay
function as this can produce poor results.
3. French: kneading, rise and baking with a longer rise time. The bread baked in this menu will have a
crisper crust and loose texture.
4. Quick: kneading, rise and baking loaf within the time less than Basic bread. But the bread baked on
this setting is usually smaller with a dense texture.
5. Sweet: kneading, rise and baking sweet bread. You may also add ingredients to add flavor.
6. Cake: kneading, rise and baking, but rise with soda or baking powder.
7. Jam: boiling jams and marmalades. Fruit or vegetables must be chopped before putting it into the
bread pan.
8. Dough: kneading and rise, but without baking. Remove the dough and use for making bread rolls,
pizza, steamed bread, etc.
9. Ultra fast: kneading, rise and baking loaf in a short time, bread with a dense texture.
10. Bake: only baking, no kneading and rise. Also used for increasing the baking time on selected
settings.
11. Dessert: kneading, rise and baking dessert.
12. Home made: Can self-program by customer, to reset kneading, rise, baking, keep warm every
step time.
The time range of each program as following：
KNEAD1： 6-14 minutes
RISE1： 20-60 minutes
KNEAD2： 5-20 minutes
RISE2： 5-120 minutes
RISE3： 0-120 minutes
BAKE： 0-80 minutes
KEEP WARM： 0-60 minutes
Under the menu of Home Made,
a) Touch CYCLE button once, KNEAD1 will appear on LCD, then touch TIME button to adjust the
minutes, and touch CYCLE to confirm the time for this step;
b) Touch CYCLE to enter the next step, RISE1 will appear on LCD, then touch TIME button to adjust the
minutes, the number will increase rapidly if TIME button is holding. Further touch CYCLE to confirm.
c) In this way set the remaining steps. Upon finishing setting for all steps, touch Start/stop button to
