485388
45
Zoom out
Zoom in
Previous page
1/50
Next page
DVB T1 PVR
- 19 -
9.7 Edit Channel Name
If you would like to change or amend the names of TV or radio stations in the program lists ("Total
List" or "Favorites List") you can do so in "3. Edit Channel Names" in the menu, "Favorite List
Manager". Select the corresponding program list with the buttons and launch it by pressing
OK. Select the name to be edited with the buttons and press OK.
9.3 Active Aerial Antenna - Power Supply
So-called active aerial antennas (indoor or outdoor) are widely used for the reception of digital
terrestrial TV. At the initial operation of the receiver you can switch on the power supply required
for these aerial antennas. The built-in amplifier of the aerial antenna is then automatically powered
by the DVB-T receiver via the connection cable and does not require additional wiring.
You can switch the power supply on or off at any given time from within the menu "General
Settings" (menu item 8). If you have a standard aerial antenna without the need to receive power,
the setting for "Antenna Booster Power" must be set to "OFF".
Go to "Favorite List Manager" and select "Remove Channels of Total List".
Select unwanted channel(s) with the buttons and OK.
Shift selected channel(s) into the trash can "Recycled", using the button.
Press GREEN button to move to the trash can "Recycled".
Press OK to shift back channels from trash can to the "Total List", if needed.
Press EXIT to delete all channels from the trash can. A warning message appears.
Press OK for delete, press EXIT to cancel the delete process.
9.6 Delete Channels of Total List
When performing an "Automatic Search" also some unwanted channels may be caught. To delete
individual channels from the "Total List" :
9.4 Auto Search Function
When you set up your receiver for the first time, an "Auto
Search" process will start automatically. If it should fail for
some reasons or you wish to search for new TV channels,
please follow the steps listed below.
Select "Auto Search" in the "Channel Manager" menu and
then press the OK button.
TV (and radio broadcast channels, if available) will be
searched.
The names of the found channels will be listed.
After the search process has been finished, the unit automatically turns to normal TV viewing
mode.
Select "Manual Search" in the "Channel Manager" menu and
then press the OK button.
Select the multiplexes (TV channel packages) you want to
search, using the buttons and OK.
After the settings are completed, press the RED button to start "Manual Search".
The names of the found channels will be listed.
After the search process has been finished, the unit automatically turns to normal TV viewing
mode.
9.5 Manual Search Function
Use this channel search by entering the multiplex information
manually to the receiver. This channel search is often used to
search for a particular channel or those channels that "Auto
Search" has missed, but it requires comparatively more
expertise.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triax DVB T1 PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triax DVB T1 PVR in the language / languages: English, German as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info