485388
44
Zoom out
Zoom in
Previous page
1/50
Next page
DVB T1 PVR
- 18 -
Start playback (normal or FF / REW).
At the beginning of a commercial spot press Del button. A "skip
mark" will be put.
Move on to the end of a commercial spot and press Del button
again. An other "skip mark" will be put.
A window "Do you want to skip?" will appear. Confirm with OK.
The skipped portion of the recording is color-marked on the
playback status bar. During all future playback sessions this
portion will be skipped automatically.
Up to seven (7) commercial spots per file (recording) can be
skipped this way.
Delete skip markings: Press "Back" button during playback.
4. Skipping automatically unwanted commercial spots during playback
Start playback. Press "i" (Info) button. A playback status bar
appears.
Press YELLOW button in order to mark the start point (A) of a
section to be repeated.
Move on to the end point (B) of the section to be repeated.
Press YELLOW button in order to mark the end point (B).
The section between A and B will be repeated endlessly.
To stop repeat playback and resume normal playback press
YELLOW button again or press (Stop) button to stop playback.
5. Repeat A - B Function
Start playback. Press "i" (Info) button. A playback status bar appears. Total recording time and elapsed
playing time are being displayed.
Enter the desired time marking in HH MM SS format, using the numeric buttons. Confirm with OK.
Playback will start at the desired position.
6. Direct Jump Function (Time-controlled Jump Function)
Example: The desired movie scene starts 7 minutes and 25 seconds after the start time of the
recording. In this case, enter 00 07 25, confirm with OK.
9.2 Setting TV Aspect Ratio and TV Signal Format
Depending on your TV set, you can adjust the aspect ratio of the picture to the screen format in
"General Settings" (Normal 4:3 or Widescreen 16:9).
If your TV set offers the additional RGB signal format instead of the regular CVBS, you can have a
better quality picture by choosing RGB (menu "General Settings"). A further TV signal format (Y/C)
is provided at the output jack "S-Video" on the back panel of the receiver. However, Y/C s can only
be picked up by TV sets equipped with a corresponding input terminal and connected with a
special cable.
9.1 Setting Date and Time / Summer Time
9. Additional Settings and Operation Functions
Date and time are integral components of the Service Information (SI) transmitted by stations and
are automatically processed by the receiver -- usually after receiving a few groups of 10 seconds
each of a broadcast. Sometimes, however, it may be necessary to make corrections. For example,
corrections must be made in cases where the power supply has been interrupted while a
scheduled recording was in countdown timer mode. A request to set the current time will be
displayed. Please wait a few seconds to complete the reception of time signals and confirm the
time displayed in the menu by pressing OK.
During Summer Time (Daylight Saving Time) the option "Summer Time" in the menu "General
Settings" has to be enabled. Otherwise all EPG information is off by one hour.
Along with basic and frequently used functions, this receiver offers additional convenient options
and an extensive area of settings that will be outlined in this section.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triax DVB T1 PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triax DVB T1 PVR in the language / languages: English, German as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info