485388

Triax DVB T1 PVR Manual

41
Zoom out
Zoom in
Previous page
1/50
Next page
DVB T1 PVR
- 15 -
Press the TIMER button on the RCU.
If you have not yet entered the actual date or time you will
now be asked to so. Use the numeric keys and confirm with
OK. As soon as you have done this the following screen will
be displayed:
This list shows all of the programmed recordings.
Select an empty slot in the list with the buttons and press
OK.
Now you can enter all data for the intended timer event.
In the column "Type" you can see if the timer function is set
for once only, daily or weekly.
You have to set the target for the recording in column 7 (Path)
either to hard disk (HDD) or to an attached VCR (VCR).
Finally, select position 8 of the menu and confirm by
pressing OK. The screen will return to the "Recording List".
In "Recording List" you can check all entries.
You can edit previously entered recording data by selecting
the corresponding position in the "Recording List" with the -
buttons. Press OK and you will see the screen "Recording
Settings". Edit the changes and confirm by pressing OK.
To delete an entry, select the corresponding event with buttons in "Recording List" and press
- button. Confirm by pressing OK, or cancel the deletion by pressing Exit when the confirmation
request is displayed.
3. How to set the timer
8.3 Recording
2. Timer Recording
1. Instant Recording
To make an instant recording, press REC button on the RCU
and recording will begin. Time delay for record start may vary
between 7 and 12 seconds, depending on the HDD standby
timer setting.
A red dot as a recording icon will appear in the upper right
corner of the screen when a recording is in progress.
To stop recording, press Stop button on the remote control unit
(RCU). A window is displayed in the lower half of the screen.
Press OK button to stop recording or "Exit" button to continue
recording.
If you allocated a fixed amount of time for the Instant Recording Duration (see menu "HDD Manager",
4), the recording will be stopped after this time has elapsed. If desired, you can deactivate this
function ("OFF ")
The recording will be stored on the HDD and will be shown on the "HDD Recorded List". It can be
displayed by pressing the "List" button on the RCU.
You can use the timer function for unattended recordings on HDD or on a conventional VCR that has
been connected to the VCR SCART connector of this unit.
You also can use the timer function for automatically switching your receiver ON / OFF or changing the
TV program at a preset time in case you don't want to miss the start of a program but want to watch
another channel until then.
The timer function allows you to set up a list with all the required timer settings in which you can enter
the date and time for the receiver to be switched on and off, the program and if necessary daily or
weekly repeat of each switching operation.
If you are currently watching a program and timer switching operation is pending, the receiver reminds
you by overlaying a massage that the timer switching operation will take place in one minute. When this
time is reached, the receiver switches over to the required channel and REC is displayed on the front
display. After the preset time has expired, the receiver switches back to the original channel.
Note: A special window will display a message that a recording is due to start in one minute.
Confirm by pressing OK, or cancel the scheduled recording by pressing Exit.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triax DVB T1 PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triax DVB T1 PVR in the language / languages: English, German as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info