485388
40
Zoom out
Zoom in
Previous page
1/50
Next page
DVB T1 PVR
- 14 -
Instant Recording: Just press a button and store what you currently see on the screen.
Timer recording: Use EPG or timer function to perform unattended recordings of TV or radio
programs.
Time Shift recording: This function is useful when you want to start viewing a live TV program later
than scheduled or in case you want to take a break while watching TV.
Further details of the above mentioned recording functions are described in this manual.
Please note: Recording of copyright protected TV and radio program material is permitted only for
personal use. In order to avoid infringements of copyright laws please observe the existing
regulations in your country.
This set top box can be used also for direct recording of TV and radio programs on a
conventional analogue VCR.
Recording can be made only from the channel you are watching for the moment. For example,
you cannot watch TV program no. 1 and record program no. 2 at the same time.
Timer recordings (internal HDD or externally connected conventional VCR) can be booked easily
by using the EPG recording function.
Time Shift (TS) viewing / recording is one of the big advantages of the built-in HDD. You can start
watching playback of a recorded program while the recording of the same program is still in
progress. Or you can pause viewing a TV program and continue watching some time later
without missing anything: the HDD drive has performed necessary intermediate recording
meanwhile.
There are three different ways of recording:
8.2 HDD Manager
This Menu shows all information on the hard disk drive (HDD)
and how to manage it.
Note: Start-up time of a "sleeping" HDD is about 5 seconds. This will increase the time delay for
recording start after pressing the record or TS (Time Shift) button. If you prefer a quicker start of
the record mode you should better select the timer setting "Always ON".
Note: The file structure of this PVR receiver is different from that of a PC. Do not turn off power during
formatting process.
3. HDD Standby Timer setting
Example: If the timer is set to 10 minutes, the HDD goes into standby mode after 10 minutes of non-
use.
By experience, a HDD will not be used at all times. Normal TV watching or radio listening does not
require a running HDD. This menu is used for both, extending service life of the HDD and saving
power that is consumed by an idling HDD.
2. HDD Format
1. HDD Information
In "HDD Information" sub menu you can call up information such
as HDD firmware, HDD capacity (size) and the amount of free
space on the hard disk.
1. To format the HDD press OK button in the this menu item.
2. Enter the factory preset password (0000) or your individual password.
3. All recordings on the HDD will be deleted.
4. A newly installed HDD should be formatted this way, too.
Toggle with L/R ( ) buttons to set the desired parameter.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triax DVB T1 PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triax DVB T1 PVR in the language / languages: English, German as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info