541686
36
Zoom out
Zoom in
Previous page
1/43
Next page
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-716BRG
35
Note: Configuring this feature assumes that you have some general networking
knowledge.
1. Log into your router management page (see “
Access your router management page
on page 18).
2. Click on Configuration at the top of the page, click on Advanced Setting, and click on
Routing.
3. Next to Static Routing, check the Enable option to enable static routing.
4. Review the static route settings.
Destination Enter the IP network address of the destination network for the
route.
(e.g. 192.168.20.0)
Subnet MaskEnter the subnet mask of the destination network for the route.
(e.g. 255.255.255.0)
Gateway Enter the gateway to the destination network for the route.
(e.g. 192.168.10.2)
Hop Enter the number of hops (routers) required to reach the destination
network. The hop count range that can be specified is 0-99.
EnableCheck the option to enable the route and uncheck the option to disable
the route.
5. To save changes, click Save at the bottom of the page.
Note: If you would like to discard the changes, click Undo before you click Save.
Enable dynamic routing on your router
Advanced Setting > Routing
You may want set up your router to route computers or devices on your network to
other local networks through other routers. If other routers support dynamic routing
such as RIP (Routing Information Protocol), you can enable this feature on your router
to automatically learn the required routes to reach those networks. It is required that
the same dynamic routing protocol and version is also enabled on the other routers in
order your router and the other routers to exchange information about the network.
Note: Configuring this feature assumes that you have some general networking
knowledge.
1. Log into your router management page (see “
Access your router management page
on page 18).
2. Click on Configuration at the top of the page, click on Advanced Setting, and click on
Routing.
3. Select the appropriate dynamic routing protocol and version communicate with other
routers.
DisabledDisable sending and receiving or exchange of routing information
dynamically between your router and other routers.
RIPv1 - Enables sending and receiving or exchange of routing information
dynamically between your router and other routers to build routes to your network
and other networks using the RIP version 1 protocol.
RIPv2 Enables sending and receiving routing information dynamically between
your router and other routers to build routes to your network and other networks
using the RIP version 2 protocol.
4. To save changes, click Save at the bottom of the page.
Note: If you would like to discard the changes, click Undo before you click Save.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-716BRG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-716BRG in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-716BRG

Trendnet TEW-716BRG Quick start guide - German - 9 pages

Trendnet TEW-716BRG Quick start guide - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info