541686

Trendnet TEW-716BRG Manual

35
Zoom out
Zoom in
Previous page
1/43
Next page
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-716BRG
34
5. Click Email Log Now to send an e-mail of the current router log using your email alert
settings.
Clicking View Log will bring you to log page (Configuration > Toolbox > System
Information). See the “View your router log” section.
Enable SNMP on your router
Advanced Setting > SNMP
SNMP (Simple Network Management Protocol) is a network management protocol used
to monitor (read) and/or manage (write) multiple network devices on a network. This
feature requires a preconfigured external SNMP server.
1. Log into your router management page (see “
Access your router management page”
on page 18).
2. Click on Configuration at the top of the page, click on Advanced Setting, and click on
SNMP.
3. Review the options for SNMP.
• Enable SNMP – Check the Local option to allow SNMP access on the router wired
LAN and wireless interfaces. Check the Remote option to allow SNMP access on the
router WAN (Internet) interface.
• Get Community – Enter the community name to match the settings with the
external SNMP server. This community will have SNMP read access only.
• Set Community – Enter the community name to match the settings with the
external SNMP server. This community will have SNMP write access.
• IP 1-4 – Enter up to four IP addresses of external SNMP servers. (e.g.
192.168.10.250)
• SNMP Version – Select the correct SNMP version to match the SNMP version of
your external SNMP server(s), V1 or V2c.
• WAN Access IP Address – You can specify a single IP address from the Internet to
allow to connect your router using SNMP. (optional)
Note: When allowing Remote SNMP access, leaving this setting blank will allow
access from any IP address from the Internet. It is recommended to specify an IP
address if allowing Remote SNMP access.
4. To save changes, click Save at the bottom of the page.
Note: If you would like to discard the changes, click Undo before you click Save.
Add static routes to your router
Advanced Setting > Routing
You may want set up your router to route computers or devices on your network to
other local networks through other routers. Generally, different networks can be
determined by the IP addressing assigned to those networks. Generally speaking and for
the case of an example, your network may have 192.168.10.x IP addressing and another
network may have 192.168.20.x IP addressing and because the IP addressing of these
two networks are different, they are separate networks. In order to communicate
between the two separate networks, routing needs to be configured. Below is an
example diagram where routing is needed for devices and computers on your network
to access the other network.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-716BRG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-716BRG in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-716BRG

Trendnet TEW-716BRG Quick start guide - German - 9 pages

Trendnet TEW-716BRG Quick start guide - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info