730203
40
Zoom out
Zoom in
Previous page
1/55
Next page
© Copyright 2012 TRENDnet. All Rights Reserved.
40
TRENDnet User’s Guide
TEW-692GR
Note: Configuring this feature assumes that you have some general networking
knowledge.
1. Log into your router management page (see “
Access your router management page
on page 26).
2. Click on Advanced, and click on Routing.
3. Review the static route settings.
Destination IP Address: Enter the IP network address of the destination network
for the route. (e.g. 192.168.20.0)
Destination IP Netmask: Enter the subnet mask of the destination network for
the route.(e.g. 255.255.255.0)
Gateway: Enter the gateway to the destination network for the route.
(e.g. 192.168.10.2)
Metric: Enter the metric or priority of the route. The metric range is 1-15, the
lowest number 1 being the highest priority. (e.g. 1 )
Interface: Click the drop-down list and select the Interface on your router where
the route is active. (e.g. LAN)
Add: Saves the static route.
Enable dynamic routing on your router
Advanced > Routing
You may want to setup your router to route computers or devices on your network to
other local networks through other routers. If other routers support dynamic routing
such as RIP (Routing Information Protocol), you can enable this feature on your router
to automatically learn the required routes to reach those networks. It is required that
the same dynamic routing protocol and version is also enabled on the other routers in
order your router and the other routers to exchange information about the network.
Note: Configuring this feature assumes that you have some general networking
knowledge.
1. Log into your router management page (see “
Access your router management page
on page 26).
2. Click on Advanced, and click on Routing.
3. Select Enabled in the pull down menu and the appropriate dynamic routing protocol
and version communicate with other routers.
RIP mode: Allows your router to send out network information to other routers
so other routers can dynamically build routes to your network.
o RIP 1 - Sends out routing information to other routers using the RIP version 1
protocol.
o RIP 2 Sends out routing information to other routers using the RIP version 2
protocol (recommended if supported by both devices).
4. Click Apply to save the changes or click Cancel to discard the changes.
Enable Application Level Gateway (ALG)
Advanced > ALG
You may want to setup your router to allow computers to use certain protocols or
services on your network. Application Level Gateway or ALG allows you to simply enable
or disables these services.
Note: Default all services are enabled.
1. Log into your router management page (see “
Access your router management page
on page 26).
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-692GR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-692GR in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-692GR

Trendnet TEW-692GR Quick start guide - English - 21 pages

Trendnet TEW-692GR Quick start guide - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info