730203
39
Zoom out
Zoom in
Previous page
1/55
Next page
© Copyright 2012 TRENDnet. All Rights Reserved.
39
TRENDnet User’s Guide
TEW-692GR
3. Review the virtual server settings.
Rule Enabled: Selecting Enabled turns on the virtual server
Rule Name: Enter a name for the virtual server or select predefined rules in the
pull down menu.
IP Address: Enter the IP address of the device to forward the port (e.g.
192.168.10.101).
TCP Ports to Open: Enter the TCP port you would like to set.
UDP Ports to Open: Enter the UDP port you would like to set.
Note: Please refer to the device documentation to determine which ports and
protocols are required. You should assign a static IP address to the device or
use DHCP reservation to ensure the IP address of the device does not change.
Inbound Filter: Select the inbound filter you have applied to reflect on the
applied rule.
Schedule: Select the defined schedule you would like to have the rule to be
applied, see “
Set schedules” section on page 33).
Add: Saves a new virtual server entry.
Clear: Discard changes to an existing virtual server.
Edit: Modifies an existing virtual server.
Delete: Removes an existing virtual server.
Inbound Filter
Advanced > Inbound Filter
Inbound filters allow you to control data going through your router from the Internet.
The feature allows you to control devices from your network through IP address.
1. Log into your router management page (see “
Access your router management page
on page 26).
2. Click on Advanced, and click on Inbound Filter.
3. Review the inbound filer settings.
Rule Enabled: Selecting Enabled turns on the virtual server
Action: Select which rule you would like to apply, Allow or Deny data.
IP Address: Enter the IP address of the device to forward the port (e.g.
192.168.10.101).
Add static routes to your router
Advanced > Routing
You may want set up your router to route computers or devices on your network to
other local networks through other routers. Generally, different networks can be
determined by the IP addressing assigned to those networks. Generally speaking and for
the case of an example, your network may have 192.168.10.x IP addressing and another
network may have 192.168.20.x IP addressing and because the IP addressing of these
two networks are different, they are separate networks. In order to communicate
between the two separate networks, static routing needs to be configured. Below is an
example diagram where routing is needed for devices and computers on your network
to access the other network.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-692GR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-692GR in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-692GR

Trendnet TEW-692GR Quick start guide - English - 21 pages

Trendnet TEW-692GR Quick start guide - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info