485464

Trekstor MovieStation Antarius PLUS Manual

53
Zoom out
Zoom in
Previous page
1/59
Next page
EN
53
I want to access files with the MovieStation that I have shared in my network. My
home network ist working correctly, but the MovieStation does not list the files.
i
If you do not have access to the shared files, please check the following points:
1) Check if the network cable is connected properly at both sides, i.e. to the MovieStation
and to your network.
2) Make sure that the computer that you want to access is running and not in a standby or
idle mode.
3) Check the network and file sharing settings on your computer.
4) Check that you have entered the correct user name and password. Please note that they
are case sensitive.
5) Make sure that your firewall settings permit the MovieStation to access your computer.
6) If you want to access files that are stored on a USB data storage device which is
connected to a router and thus made available as network storage, please note that you
must set up a connection to the drive using "M
Y_SH O r T C U T S ". To do so, you must enter the
IP address of your router as well as the user name and the password necessary to access
the network storage.
How is it possible that the playback of a file from a shared folder in the network is
aborted?
i
The energy saving settings of the computer or the NAS interrupt the connection.
If the energy saving settings of your computer or your NAS are active, then they can go into
an idle state or a sleep mode even though they are being accessed via the network. During a
sleep mode no data is transferred via the network. Please adjust the energy saving settings of
the media source so that it does not go into a sleep mode while you play files via the network.
Why is it possible that there are interruptions when playing movies from my local
network?
i
Sometimes, there are several devices in a network that have to share the maximum data
transfer rate possible via a network connection (shared medium). If there are several
connections active in the network you use the MovieStation in (e.g. to the internet, a shared
printer, etc.), it is possible that this lowers the data transfer rate available for the streaming of
the data to the MovieStation to a level that is insufficient for the playback of e.g. a DVD file or
an HD movie file.
Should you experience such problems, please try to reduce the amount of data transferred by
other users of your network.
While using the MovieStation, it no longer responds to my commands.
i
This problem may have several causes. Please check the following items:
1) Please aim the remote control in the direction of the MovieStation so that direct visual
contact between these two devices exists and ensure that the infrared receiver of the
remote control and the MovieStation are not covered.
2) Check the battery in the remote control and, if necessary, replace it with a new one.
II have connected the MovieStation to my TV via HDMI and I want to change the
video output signal, but the video output resolution I want to use is not available.
i
Your TV does not support all possible video output resolutions.
Go to the settings menu of your MovieStation and select "A
U T O " under the menu item "TV
S Y S T E M ". Your MovieStation will try to automatically select the best possible video output
resolution for your TV.
i
In some rare cases it is possible that not all options supported by the TV are selectable. This
problem can occurr when the TV is switchen on from its standby mode, regardless of the
current operating status of the MovieStation.
In order to be able to select all video output resolutions supported by your TV, disconnect
your MovieStation from the power supply and reconnect it after a few seconds. Now all
available video output resolutions are shown in the settings menu.
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trekstor MovieStation Antarius PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trekstor MovieStation Antarius PLUS in the language / languages: English, German as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info