485451
26
Zoom out
Zoom in
Previous page
1/34
Next page
EN
26
• Station search menu
Satellite setup
In the sub menu "
chANNeL SeArch" you can carry out a channel search. That may be
necessary, when e. g. a slot (transponder) of a channel on the satellite is changed by
the satellite operator. When searching channels, please proceed as it is described in the
section "First start up of the TrekStor HD SatReceiver Luna S2 PVR" from point d) on.
• Time menu
Standby
Here you can choose at what time the SatReceiver shall switch off itself/shall be set
into the standby mode without pressing any button. The legislator prescribes, that a
SatReceiver has to be preset in a way that it switches automatically into the standby
mode after three hours, if there is no use of it. You can switch off this function by selecting
"oFF".
• Option menu
Digital audio
In the submenu "
oPtioN" you will be able to adjust the format for the digital sound output
(via the HDMI respective the S/PDIF output). When using the setting "rAw" the sound
output must be made via a TV or a surround receiver, which is able to decode a digital,
multi-channel sound. In case your TV is not supporting that function, please choose the
option "Pcm".
• System menu
Set a password
For some functions (e. g. the editing of the channel list or the viewing of a locked
channel) it is necessary to set a password. The default password of the SatReceiver is
000000. With this menu item you will be able to change the password. In case you have
already assigned an own password and would like to change it, then enter it into the field
"
eNter oLD PASSworD". Under "eNter New PASSworD" and "coNFirm PASSworD" you will have to
enter the new password. Please write down your password somewhere and keep it in a
save place!
Restore factory default
When choosing this menu item, the settings of the SatReceiver will be reset to the default
settings and the menu for the first start up will appear.
Recall list
This menu item affects the behavior of the j button of the remote control. When
you choose the setting "oN", a channel list with the last used channels is displayed after
pressing the j button. Here you can choose a channel out of the list. When you
choose the setting "oFF", the SatReceiver switches directly to the last used channel after
pressing the j button. Now you can easily switch between two channels.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trekstor Luna S2 PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trekstor Luna S2 PVR in the language / languages: English, German as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info