485451
24
Zoom out
Zoom in
Previous page
1/34
Next page
EN
24
e) Inside this menu please choose the desired satellite by pressing the L or K button and
mark your choice by using the k button. In most cases that is the Satellit Astra 1H on the
position 19.2° E (storage location 002 inside the default satellite list). Below the channel
list you can find a bargraph, on which the "QuALity" of the current signal is displayed.
In case you would like to change the settings, which are displayed within the right half of
the menu, press the M button and carry out the desired change. The settings concerning
the satellite system are saved by pressing the D button.
f) Please press the blue button of the remote control. A window with the title "
StAtioN SeArch"
appears and you can carry out further settings. But usually no more settings have to be
adjusted here.
g) Start the station scan on the marked satellite with a new push on the blue button. It
appears the request "
DeLete ALL chANNeLS oF the choSeN SAteLLite?". If you would like to keep
the default channel list, which contains the most popular channels of the German TV,
press the D button. The new channels will then be attached to the default channel list.
In case you would like to overwrite the default channel list, please press the k button.
While the channel search is running, you will be informed about the progress of the
search and about all found TV and radio channels.
h) After having completed the channel search, the channel list will be stored automatically and
the SatReceiver starts to playback. You can now edit the channel list by e. g. creating a favorite
list. You will find an instruction for that under the section "
eDitiNg the chANNeL AND FAvorite LiSt".
4) Operating the TrekStor HD SatReceiver Lunda S2
4.1) General operation
Turning the SatReceiver on/off
In case the SatReceiver is connected to the power supply, you can shift to the standby mode
by pressing the a button on your remote control.
In order to switch the SatReceiver completely off, you must disconnect it from the power
supply.
Adjusting the volume
You can raise or lower the volume by pressing the M or N button.
i
If you keep the M or N button pressed, the volume changes constantly.
In case you are pressing the b button, you can switch off the volume completely (mute) as
well as loud again.
Changing channels
There are several possibilities to change a channel:
• With the numerical keys (0 until 9) of your remote control you can insert the number
of the desired channel. If, for example, you would like to choose the channel number 23,
then press consecutively the keys 2 and 3 and wait until the channel was changed. As a
check the inserted numbers are displayed onto a small information field on the screen.
• With the K or L button of the remote control you can switch to the next respective the
previous channel.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trekstor Luna S2 PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trekstor Luna S2 PVR in the language / languages: English, German as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info