Manual Trek eBike Systems 2023 - Bosch (page 102 of 376) (English, German, Dutch, French)

817492

102

Zoom out

Zoom in

1/376

English – 4

eBike is switched on, then the on-board computer's internal

battery is powered and charged by the eBike battery.

If the on-board computer is removed from the holder(5),

the power is supplied by the on-board computer's internal

battery. If the charge of the on-board computer's internal

battery is running low, a warning message appears on the

display.

To charge the on-board computer's internal battery, slide the

on-board computer back onto the holder(5). Note that if

you do not charge the eBike battery straight away, the eBike

will automatically switch off after tenminutes of inactivity. If

this happens, the on-board computer's internal battery will

also stop charging.

You can also charge the on-board computer via the USB

port(6). To do this, open the protective cap(17). Use a Mi-

cro USB cable to connect the USB port on the on-board com-

puter to a commercially available USB charger (not included

with the product as standard) or to the USB port of a com-

puter (max. 5V charging voltage; max. 1000mA charging

current).

If the on-board computer is removed from the holder (5), all

values for the functions are saved and can still be scrolled

through.

After use, the USB port must be carefully resealed with the

protective cap(17).

If the on-board computer's internal battery is not recharged,

the date and time will be retained for up to sixmonths. When

the on-board computer is switched on again, the date and

time will be reset if a Bluetooth® connection to the app has

been established and the smartphone has successfully iden-

tified the current location via GPS.

Note: The Kiox only charges while it is switched on.

Note: If the Kiox is switched off during charging via a USB

cable, the Kiox can only be switched on again once the USB

cable has been disconnected.

Note: To maximise the service life of the on-board com-

puter's internal battery, it should be recharged for onehour

every three months.

Battery charge indicator of the eBike battery

The battery charge indicator of the eBike batteryd(see

"Start page", pageEnglish – 7) can be read on the status

page and in the statusbar. The eBike battery's state of

charge is also indicated by the LEDs on the eBike battery it-

self.

Colour of the indicator Meaning

Green The eBike battery is over

30% charged.

Orange The eBike battery is between

15% and 30% charged.

Red The eBike battery is between

0% and 15% charged.

Red + ! The capacity for assisting the

drive has been used up, and

assistance is switched off.

The remaining capacity will

Colour of the indicator Meaning

be provided for the bike

lights and the on-board com-

puter.

If the eBike battery is being charged on the bike, a corres-

ponding notification will be displayed.

If the on-board computer is removed from the holder(5),

the state of charge that was last displayed for the eBike bat-

tery is saved.

Resetting Storage Mode/Kiox

The on-board computer has an energy-saving storage mode

which minimises the rate at which the internal battery dis-

charges. Setting to this mode erases the date and time.

This mode can only be activated by pressing and holding the

on/off button(4) of the on-board computer for at least

eightseconds.

If the on-board computer does not start when the on/off but-

ton(4) is pressed briefly, the on-board computer is in stor-

age mode.

You can deactivate storage mode by pressing the on/off but-

ton(4) for at least twoseconds.

The on-board computer detects whether it is in a fully func-

tional condition. If you press and hold the on/off button(4)

for at least eightseconds while in a fully functional condition,

the on-board computer will go into storage mode. If, con-

trary to expectations, the Kiox is not in a fully functional con-

dition and cannot be operated, pressing and holding the on/

off button(4) (for at least eightseconds) will reset it. After

being reset, the on-board computer will restart automatically

after approx.fiveseconds. If the Kiox does not restart, press

the on/off button(4) for twoseconds.

To reset the Kiox to its factory settings, select<Set-

tings>→<Sys settings>→<Factory reset>. All user data

will be lost.

Setting the assistance level

On the operating unit(7), you can set the level of assistance

you want the eBike drive to provide you with while pedalling.

The assistance level can be changed at any time, even while

cycling.

Note: In some models, the assistance level may be preset

and cannot be changed. There may also be fewer assistance

levels available than stated here.

The following assistance levels are available as a maximum:

–OFF: Drive assistance is switched off. The eBike can only

be moved by pedalling, as with a normal bicycle. The walk

assistance cannot be activated at this assistance level.

–ECO: Effective assistance with maximum efficiency, for

maximum range

–TOUR/TOUR+:

TOUR: Steady assistance, long range for touring

TOUR+: Dynamic assistance for natural, sporty cycling

(only in conjunction witheMTB)

1 270 020 XBK | (14.02.2023) Bosch eBike Systems

102

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trek eBike Systems 2023 - Bosch in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 20.37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trek eBike Systems 2023 - Bosch Manual

Product: