775437
29
Zoom out
Zoom in
Previous page
1/77
Next page
26 TREK ASSEMBLY MANUAL 27 April 2012
Basic Assembly
To adjust the front derailleur
1. Shift the chain onto the inner chainring and large rear cog.
2. Set the inner limiting screw (Figure 57) so that the chain clears the inner cage plate
by 0.5-1mm.
3. Apply tension to the end of the cable, push the derailleur outboard about 2-3mm,
and tighten the cable clamp bolt.
4. Shift to the outer chainring and outer rear cog.
5. Set the outer limit screw (Figure 58) so that the chain clears the outer cage plate
by 0.5-1mm.
To nish the cable end
1. Cut the cable so that no more than 2 inches (51mm) extends beyond the anchor
bolt.
2. Crimp a metal cap or place a bit of solder on the end of the cable to prevent
fraying.
Figure 57. Low gear limiting screw on front derailleur
Figure 58. Outer gear limiting screw on front derailleur
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek 2012 in the language / languages: English as an attachment in your email.

The manual is 3.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info