548204
38
Zoom out
Zoom in
Previous page
1/41
Next page

2. Apply a this layer of grease
over all the threads.
3. Install the pedals on the proper
side; put the right pedal on the
right crank arm and the left
pedal on the left crank arm.
4. Tighten the pedals.

Every month, lubricate all pivot
points on both the front and rear
derailleurs, including the derail-
leur pulleys on the rear derailleur,
with chain lube.

Once a year, have your dealer re-
grease the headset bearings.

Every 3 months lubricate your
brake lever pivots and brake arm
fixing pivots with a light oil.

Once a year, have your dealer re-
grease the wheel bearings.
Every year, lubricate wheel
quick-releases. Apply several
drops of synthetic lube or a
similar light oil where the quick-
release lever rotates in the quick-
release body.

Once a month, apply a light oil to
the upper fork leg where the lower
leg slides on it. Wipe clean.

No lubrication is required for
the shock or the pivot of your
full suspension bike. Avoid all
lubricants.

Lubricate cables whenever they
are installed.

Installing a cable in a cantilever brake requires
special tools and training, so should only be
done by your dealer.
1. Note the path of the old cable,
loosen the cable anchor bolt,
and remove the worn cable.
2. Grease the new cable and
reinstall, feeding it along the
same path as the old cable,
including through the cable
anchor bolt.
3. Make sure the leaded cable-end
is seated properly in the lever,
and the housing is properly
seated in the lever.
If needed when installing a cable in a brake,
re-adjust the brake.
4. Turn the adjusting barrel
clockwise so the threads on
the adjusting barrel are not
exposed.
For a shift cable, put the shifter in the position
with the least cable tension.
For a brake, hold the brake closed while you do
the next step.
5. Tighten the cable clamp bolt
to52-69 lb•in. (6-8 N•m).
6. Cut the cable so that no more
than 2” (51 mm) extends
beyond the anchor bolt.
7. Crimp a metal cap or place a
bit of solder on the end of the
cable to prevent fraying.
8. Follow the instructions for
adjustment.
Chapter : Lubrication
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek 07-TK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek 07-TK in the language / languages: English as an attachment in your email.

The manual is 5,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info