548204
37
Zoom out
Zoom in
Previous page
1/41
Next page

This section explains the parts
that require lubrication, their
frequency, and brief instructions.
See your dealer for recommended
lubrications. If you need more
detailed information, see other
sections of this manual as needed,
or consult your dealer.
Re-greasing bearings requires
special tools and training, so
this should only be done by
your dealer. Some bearings are
permanently sealed and do not
require yearly re-greasing

Once a year lubricate the stem.
Note: Lubricating a direct-connect stem
requires adjustment of the headset bearings, so
should only be done by your dealer.
1. Remove the stem from the
frame.
2. Clean the stem and wipe any
old grease.
3. Apply a thin layer of grease
to the section of the quill that
will be inserted into the frame,
including the stem wedge.
4. Install the stem.

Once a year, lubricate the
seatpost. Choose the method for
your frame and seatpost material:


1. Loosen the seatpost binder
bolt, or open the quick-release,
and remove the seatpost from
the frame.
2. Wipe any old grease off the
seatpost, and clean if necessary.
3. Apply a thin layer of grease to
the section of the seatpost that
will be inside the frame.
4. Insert the seatpost into the
frame.
5. Adjust the seat to the proper
height, align it, and tighten the
seatpost binder bolt.


1. Loosen the seatpost binder
bolt, or open the quick-release,
and remove the seatpost from
the frame.
2. Wipe the seatpost and inside
the seat tube with a soft cloth
and clean water.
3. Let the seeatpost dry, then
insert it into the frame.
4. Adjust the seat to the proper
height, align it, and tighten the
seatpost binder bolt.

Once a year, have your dealer
re-grease the bottom bracket
bearings,

Once a year, have your dealer re-
grease the pedal bearings.
Once a year re-grease the pedal
axles where they thread into the
crank arms.
Note: There are right and left pedals, usually
marked with a letter stamped on the end of the
pedal axle, or on the wrench ats.
1. Remove the pedals; turn the
right pedal spindle counter-
clockwise, but turn the left
clockwise.

Chapter : Lubrication
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek 07-TK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek 07-TK in the language / languages: English as an attachment in your email.

The manual is 5,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info