English
7
IMPORTANT SAFETY REGULATIONS
Please read all safety regulaons carefully before using the product.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18
19.
20
21.
22.
23.
24.
25.
26.
27.
Only use the fan in the manner described in this manual.
Always place the fan on a at surface.
This fan may not be used without a pedestal or lying on its side.
Don’t use this fan outdoors.
Don’t use this fan in spaces with a high humidity, such as bathrooms.
Don’t use the fan in an environment where gasoline, paint or similar ammable liquids are used or stored.
Before use, check the rated voltage indicated on the label on the product. This fan is designed for an electric
power supply of 220-240V~50Hz.
This fan must not be earthed!
Don’t use any electrical extension cord for this fan.
This fan is not suitable for dimmers.
Don’t arrange the cable underneath a covering object. Arrange the cable in such a way that nobody can trip
over it.
Regularly check the cable for any damage. If the cable is damaged, it must be replaced by the manufacturer or
supplier. The cable may also be repaired by a qualied person to prevent dangerous situaons.
The user may not open the fan.
No parts of this fan may be replaced by the user.
This product is not suitable for children younger than 8 years old.
This product is not intended for use by persons (including children) with reduced physical, sensory or mental
abilies, or with a lack of knowledge and experience, unless they’re under the supervision of or have received
instrucons regarding the device from a person responsible for their safety.
Never insert your nger through the mesh of the fan.
Don’t allow children to insert objects through the mesh.
Don’t use the fan near a window.
Never let hair, curtains, table cloths or clothing get near the fan.
Make sure that the fan does not touch any objects during oscillaon.
The fan must always be disconnected from the wall outlet when not in use. Make sure the fan is fully switched
o before removing the plug from the wall outlet.
Switch o the fan and remove the plug from the wall outlet before cleaning the fan.
You may use a so and dry cloth to remove dust from the fan. If the fan is very dirty, you may use a slightly
moist cloth to clean the fan. Never use any cleaning agents, sprays or other chemical liquids, as they will
damage the fan.
The motor bearings are permanently sealed and don’t require addional lubricaon.
Never let water get into or onto the fan housing.
Store the fan in its original packaging in a dry venlang room.
