Manual Trebs 99332 Comfortemp (page 17 of 26) (English, German, Dutch, French)

650047

Zoom out

Zoom in

1/26

4 Instructions of LED on the kettle body:

1) Pre-set temperature is 50℃ -- the LED dark green; 70℃--the LED shine blue;80℃--LED shine

purple; 90 ℃--LED light green; 100 ℃--LED shine red;

2) The LED turns on in the process of setting the temperature, heating or keeping warm. When

finish heating the LED turns off.

5 Instructions of Working Status:

Normal mode:

1) Power on → Buzz twice → Indicator light all light up 1 second → LED on kettle body flash red,

green, blue in turn → into standby status

2) After power on, default pre-set temperature is 100℃, press the start button to boil directly.

When water temperature gets 98℃, the kettle starts timing and it will stop heating after 8-10

seconds, then turn into the standby status after buzz twice.

3) If you not press the start button after the pre-set temperature, the corresponding indicator

light shall turn off after 15 seconds, and the kettle turns into the standby status.

4) When start heating after pre-set the temperature, the indicator light turns on, after the

water gets pre-set the temperature kettle stops heating, then buzz twice, and the LED on the

kettle body turns off, the indicator light still keeps shining. Turn into the standby state after a

minute. The boiling water temperature range is +3 degrees.

5) During the heating process, you can set the temperature through the pre-set temperature

button.

Keep warm mode:

1) In standby status, press the start button 3 seconds to turn into the keep warm mode and the

water starts heating. To default the pre-set temperature is 50℃, press the start button 1

second again and the kettle stops working and will turn into the standby status.

2) Turn into keep warm mode, you shall pre-set the temperature first, the corresponding

indicator light turns on: if not press the start button 3 seconds after set the temperature, the

indicator light shall turn off after 15 seconds, and the kettle turns into the standby status. If

you press the start button 3 seconds after pre-set the temperature, then the kettle turns into

the keep warm mode and starts heating. The corresponding indicator light will flash with an

interval of 0.5 seconds.

3) In keep warm mode, when the water temperature gets to the pre-set temperature the first

time, the kettle shall buzz twice, and will not buzz afterwards.

4) After getting the pre-set temperature the first time, the kettle starts to keep warm in 30

minutes, when water temperature will be below the pre-set temperature, the kettle start

heating automatically: after 30 minutes the kettle turns into the keep warm mode and then

into standby status.

5) In keep warm mode, only the corresponding pre-set temperature indicator light flashes,

others light off, until the keep warm stops: in keep warm process, press the pre-set

temperature button into invalid.

6) The keep warm temperature range is 1/+3 degree.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trebs 99332 Comfortemp in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trebs 99332 Comfortemp Manual

Product: