714421
754
Zoom out
Zoom in
Previous page
1/771
Next page
Configuring SNMP & RMON Configuration Example
Configuration Guide
731
6.3 Network Topology
As shown in the following figure, the NMS host with IP address 172.168.1.222 is connected
to the core switch, Switch B. On Switch A, ports 1/0/1 and 1/0/2 are monitored by the NMS;
port 1/0/3 is connected to Switch B. And port 1/0/3 and the NMS are able to reach one
another.
Figure 6-1 Network Topology
Gi1/0/1
NMS
Switch B
Switch A
IP: 172.168.1.222
Gi1/0/2
Gi1/0/3
Demonstrated with T1600G-28TS, this chapter provides configuration procedures in two
ways: using the GUI and using the CLI.
6.4 Using the GUI

Configuring Rate Limit on ports
Configure the rate limit on required ports. For detailed configuration, please refer to
Configuring QoS
.

Configuring SNMP
1) Choose SNMP > SNMP Config > Global Config to load the following page. Enable
SNMP, and set the Remote Engine ID as 123456789a. Click Apply.
754


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK T1600G-28PS (TL-SG2424P) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK T1600G-28PS (TL-SG2424P) in the language / languages: English as an attachment in your email.

The manual is 7,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info