714421
753
Zoom out
Zoom in
Previous page
1/771
Next page
Configuration Guide 730
Configuring SNMP & RMON Configuration Example
6
Configuration Example
6.1 Network Requirements
A company that deploys NMS to monitor the operation status of TP-Link switches has
requirements as follows:
1) Monitor traffic flow of specified ports, and send notifications to the NMS when the
actual rate of transmitting and receiving packets exceeds the preset threshold.
2) Monitor the sending status of specified ports, and regularly collect and save data for
follow-up checks. Specifically, during the sample interval, the switch should notify the
NMS when the number of packets transmitted and received on the port exceeds the
preset threshold; the switch should record but not notify the NMS when the number of
packets transmitted and received is below the threshold.
6.2 Configuration Scheme
1) Set a limit on the rate of the specified ports, and then enable SNMP on Switch A.
Configure SNMP and Notification, and enable Trap notifications on the ports. Switch
A can then send notifications to the NMS when the actual rate exceeds the preset
threshold.
2) After SNMP and Notification configurations, you need to create statistic entries on the
ports to monitor the real-time transmitting and receiving of packets and create history
entries to regularly collect and save related data. Create two event entries: one is the
notify type used to notify the NMS, the other is the log type used to record related
events. In addition, create an alarm entry to monitor BPackets (Broadcast Packets), set
the rising threshold and falling threshold, and bind the rising event to the notify event
entry, and the falling event to the log event entry.
753


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK T1600G-28PS (TL-SG2424P) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK T1600G-28PS (TL-SG2424P) in the language / languages: English as an attachment in your email.

The manual is 7,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info